Polycom RealPresence 1800 Administration Manual page 378

11 Create in your machine the appropriate IP services as required. For more information, see
Network Services - SIP Servers
12 Add system flag MMCU_BYPASS_ENABLE_RDP and set it to YES.
13 Select Enable MS RDP content. For more information, see
DMA.
14 To share content in the encrypted Direct Call, set Set-CsClientPolicy -P2PAppSharingEncryption to
Supported on the Skype for Business Front End server.
15 Change cascade link from Attendees to Presenters in Skype for Business. For more information,
see Change a Cascade Link (Polycom Participants) from an Attendee to a Presenter in Skype for
Business.
Monitoring Modular MCU Components
Provided the Collaboration Server is in MMCU mode (see
replaces the Hardware Monitor in the RMX Management pane.
The Main MCU rhythmically (fixed - every 30 seconds) verifies each of the Soft Blades proper operation,
and monitors its status.
Note: Monitoring Applicability
The monitoring applies to the connection between the endpoint and the Translator, and not to any
internal communications.
To launch the System Monitor:
1 In the RMX Management pane, click System Monitor to display the list of machines comprising the
MMCU.
The System Monitor is displayed, with the Main MCU at the top, followed by the list of its assigned
Soft Blades.
2 Double-click on any of the MMCU machines to view its specific component information as follows:
 Double-clicking a hardware Main MCU (Collaboration Servers 1800/2000/4000), results in
displaying its Hardware Monitor.
 Double-clicking a soft Main MCU (Collaboration Server Virtual Edition), results in displaying the
VM Monitor, which includes information on the cores, clock frequency, memory, storage, and CPU
model.
 Double-clicking one of the Soft Blades, results with displaying the Soft Blade Monitor, with similar
information, as well as the Soft Blade use percentage, and the number of active Translators.
From this point:
 Right-click Active Translators, and select View Properties, or double-click Active
Translators, to display the list of Translators on this Soft Blade, aggregated according to their
type.
 If the Soft Blade information cannot be viewed, since the Soft Blade is in one of the
dysfunctional states in the State Machine, an error message pops-up, indicating Soft Blade
details cannot be viewed.
Polycom, Inc.
Dialog.
MCU Operation
Appendix - Modular MCU
Polycom MCU Video Quality Dialog on
Mode), the System Monitor
IP
357