c Set the Telepresence Mode to Auto/On and select the Telepresence Layout Mode.
4 Assign the New Profile to the Meeting Room. For more information see
Room.
5 Configure a Virtual Meeting Room (VMR) on the DMA.
The procedures for configuring DMA are described in detail in the Polycom Unified Communications
Deployment Guide for Cisco Environments.
Resolution Configuration
The resolution configuration dialog is not applicable to TIP-enabled conferences as it uses fixed settings.
HD Video Resolutions for TIP calls are determined according to the following table:
Polycom, Inc.
Appendix - Polycom Open Collaboration Network (POCN)
Creating a New Meeting
414