Polycom RealPresence 1800 Administration Manual page 234

General System Flags
Flag Name
SET_AUDIO_PLC
SET_AUTO_BRIGHTNESS
SET_DTMF_SOURCE_DIFF_IN_SE
C
SIP_AUTO_SUFFIX_EXTENSION
SIP_ENABLE_FECC
Polycom, Inc.
Description
Packet Loss Concealment (PLC) for Siren audio
algorithms improves received audio when packet
loss occurs in the network.
Supports the following audio algorithms:
• Siren 7 (mono)
• Siren 14 (mono/stereo)
• Siren 22 (mono/stereo)
Possible Values: ON/-OFF
Default value: ON
Possible value: OFF/ON
Note: The speaker's endpoint must use a Siren
algorithm for audio compression.
Auto Brightness detects and automatically adjusts
the brightness of video windows that are dimmer
than other video windows in the conference layout.
Auto Brightness only increases brightness and does
not darken video windows.
Note: This flag sets the initial value for Auto
Brightness during First-time Power-up. Thereafter
the feature is controlled through the New Profile -
Video Quality dialog box.
Default value: NO
Possible Values: YES/NO
If the ACCEPT_VOIP_DTMF_TYPE flag is set to 0
(Auto) this flag determines the interval, in seconds
after which the RealPresence Collaboration Server
will accept both DTMF tones (inband) and digits
(outband).
Default value: 120
Used to automatically add a suffix to a SIP address
(To Address) instead of adding it manually in the
RMX Web Client (SIP address) when the SIP call is
direct-dial and not through a Proxy.
Example:<is listing of example essential?>
Participant Name = john.smith
Company Domain = maincorp.com
SIP_AUTO_SUFFIX_EXTENSION flag value =
@maincorp.com
Entering john.smith will generate a SIP URI =
john.smith@maincorp.com
By default, enable FECC support for SIP endpoints
at the MCU level. You can disable it by manually
adding this flag and setting it to NO.
Possible values: YES/NO.
System Flags
Platform Add?
HW/VE Yes
HW/VE Yes
HW/VE Yes
HW/VE No
HW/VE Yes
213