Polycom RealPresence 1800 Getting Started Manual
  1. Manuals
  2. Brands
  3. Polycom Manuals
  4. Server
  5. realpresence 1800
  6. Getting started manual

Polycom RealPresence 1800 Getting Started Manual

Collaboration server virtual edition
Hide thumbs Also See for RealPresence 1800:
Table of Contents

Advertisement

Quick Links

Download this manual
GETTING STARTED GUIDE
Version 8.6 | June 2015 | 3725-74201-000A
Polycom RealPresence®
Collaboration Server
1800/2000/4000/Virtual Edition

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RealPresence 1800 and is the answer not in the manual?

Questions and answers

Related Manuals for Polycom RealPresence 1800

Summary of Contents for Polycom RealPresence 1800

  • Page 1 GETTING STARTED GUIDE Version 8.6 | June 2015 | 3725-74201-000A Polycom RealPresence® Collaboration Server 1800/2000/4000/Virtual Edition...
  • Page 2 Polycom up to three (3) years after the distribution date of the applicable product or software at a charge not greater than the cost to Polycom of shipping or distributing the software to you. To receive software information, as well as the open source software code used in this product, contact Polycom by email at OpenSourceVideo@polycom.com.

  • Page 3: Table Of Contents

    Polycom and Partner Resources ......4 The Polycom Community ....... . 4 Audience, Purpose and Required Skills .
  • Page 4 Set available languages in the Login Screen ..... 58 Default System Flags ........59 Chapter 5: Starting Conferences Using Default Profiles .

  • Page 5: Chapter 1: About This Guide

    Polycom RealPresence Collaboration Server Editions The Polycom RealPresence Collaboration Server is available in an Appliance Edition (for use with a Polycom Rack Server) and a Virtual Edition (packaged as software only). Most of the functionality described in this document applies to both editions, and so the product references are general-that is, the Polycom RealPresence Collaboration Server.

  • Page 6: Polycom And Partner Resources

    Participate in discussion forums to share ideas and solve problems with your colleagues. To register with the Polycom Community, simply create a Polycom online account. When logged in, you can access Polycom support personnel and participate in developer and support forums to find the latest information on hardware, software, and partner solutions topics.

  • Page 7: Audience, Purpose And Required Skills

    URPOSE AND EQUIRED KILLS Audience, Purpose and Required Skills This guide is written for a technical audience. This guide assumes that you are starting with a Polycom RealPresence Collabo- ration Server that has never been previously configured. OLYCOM RESENCE OLLABORATION...
  • Page 8 .8.6 BOUT UIDE OLYCOM RESENCE OLLABORATION ERVER V UDIENCE URPOSE AND EQUIRED KILLS OLYCOM RESENCE OLLABORATION ERVER ETTING TARTED UIDE...

  • Page 9: Chapter 2: Virtual Edition Installation

    Deploy through the RealPresence Platform Director using the procedures in the following sections: • Review the Polycom RealPresence Collaboration Server Release Notes to ensure that your host machine has the capacity for your planned Polycom RealPresence Collaboration Server system deployment. • Install the RealPresence Platform Director System •...

  • Page 10: Install Polycom Realpresence Collaboration Server, Virtual Edition Software With

    Server, Virtual Edition system: To install Polycom RealPresence Collaboration Serverusing your virtual environment tools: Use your virtual environment tools to install an instance of the Polycom RealPresence Collaboration Server system. Host Installation Guidelines Before deploying your Polycom RealPresence virtual edition software, review the following planning guidelines for your deployment.
  • Page 11 Network Interface Card (NIC) from the host dedi- cated for the virtual machine. • Dedicated VM Server - To maximize audio and video quality Polycom strongly recommends a dedicated VM server per RealPresence Collabora- tion Server.
  • Page 12 Collaboration Server, Virtual Edition, using general purpose hardware in a data center or in the cloud. The RealPresence Platform Director is available at no charge from Polycom Support. If your RealPresence Platform Director system was installed in a VMware vCenter environment with the required credentials, you can use the RealPres- ence Platform Director system to deploy Polycom software.

  • Page 13: Deploy Realpresence Collaboration Server Using A 3Rd Party Virtual Environment

    .8.6 OLYCOM RESENCE OLLABORATION ERVER V IRTUAL DITION NSTALLATION EPLOY RESENCE OLLABORATION ERVER SING A ARTY IRTUAL NVIRONMENT using Hyper-V tools and the add the instance to the RealPresence Platform Director system. To install the RealPresence Collaboration Server, Virtual Edition, through RealPresence Platform Director: Deploy the RealPresence Platform Director in your environment.
  • Page 14 Machine Queue of the Network Interface Card (NIC). For more information, see https://support.microsoft.com/en-us/kb/2902166. Polycom recommends that a VMware or Hyper-V administrator install the soft- ware. After installation into the virtual environment, additional configuration should be done by someone who understands video conferencing.

  • Page 15: Chapter 3: Appliance Edition Installation

    .8.6 OLYCOM RESENCE OLLABORATION ERVER V PPLIANCE DITION NSTALLATION REPARE FOR YSTEM NSTALLATION Appliance Edition Installation The section provides information about preparations required before installing RealPresence Collaboration Server (RMX) 1800/2000/4000. Perform the following steps for the preparations: • Prepare for System Installation •...
  • Page 16 .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V REPARE FOR YSTEM NSTALLATION Completing the First Time Setup Worksheet Before you begin install and system setup, fill out the My System Values column of this worksheet. My System Factory-Set Item Values Default Values Description...
  • Page 17 .8.6 OLYCOM RESENCE OLLABORATION ERVER V PPLIANCE DITION NSTALLATION REPARE FOR YSTEM NSTALLATION My System Factory-Set Item Values Default Values Description Media Card This is optional to RealPresence 4 IP Collaboration Server 4000 systems. Address This is not applicable for RealPresence Collaboration Server 1800/2000 systems.
  • Page 18 .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V REPARE FOR YSTEM NSTALLATION Preparing the Installation Site This section describes the requirements your site must meet for the safe instal- lation and operation of the system. Safety Requirements For your protection, please read these safety instructions completely before operating the equipment.
  • Page 19 .8.6 OLYCOM RESENCE OLLABORATION ERVER V PPLIANCE DITION NSTALLATION REPARE FOR YSTEM NSTALLATION • Decide on a suitable location for the equipment rack that will hold the RealPresence Collaboration Server unit. It should be situated in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and electromagnetic fields are generated.

  • Page 20: Unpack Realpresence Collaboration Server (Rmx) 1800/2000/4000

    .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V (RMX) 1800/2000/4000 NPACK RESENCE OLLABORATION ERVER • Use a regulating uninterruptable power supply (UPS) to protect the Real- Presence Collaboration Server from power surges and voltage spikes, to keep your MCU operating in case of a power failure.The RealPresence Collaboration Server 4000 requires either two DC or three AC power supply cables, each connected to a power supply.
  • Page 21 .8.6 OLYCOM RESENCE OLLABORATION ERVER V PPLIANCE DITION NSTALLATION (RMX) 1800/2000/4000 NPACK RESENCE OLLABORATION ERVER The RealPresence Collaboration Server (RMX) 1800/2000/4000 is ® shipped in a packing case with Stratocell packaging, and the top cover must be unlocked and lifted. Boxes are placed on the top Stratocell and contain installation accessory kit, Telescopic rail runners accessory kit, and optional ISDN card package.
  • Page 22 .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V (RMX) 1800/2000/4000 NPACK RESENCE OLLABORATION ERVER Table 1-1: Installation Accessory Kit RMX 1800 RMX 2000 RMX 4000 1 AC power cable 1 power cable 3 power cables 2 Ethernet cables 1 Ethernet cable 4 Ethernet cables 1 USB Key 1 USB Key...
  • Page 23 .8.6 OLYCOM RESENCE OLLABORATION ERVER V PPLIANCE DITION NSTALLATION (RMX) 1800/2000/4000 NPACK RESENCE OLLABORATION ERVER Item Item Quanti Part/Kit no. Item Item Sample Rack spacer Rack spacer Front & Rear assembly kit Flat head screw - M5*10mm Rail runner Flat head screw - assembly kit M3*8mm Flat washer M3...
  • Page 24 .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V (RMX) 1800/2000/4000 NPACK RESENCE OLLABORATION ERVER Determine the location of the Collaboration Server on the rack: • Allow for a 1U gap above and below the system for ventilation. • Use the Rack Spacer (item no. 3) to predetermine its position on the rack post, making sure that square studs of the spacer fit into the rack post's square/rounded mounting holes.
  • Page 25 .8.6 OLYCOM RESENCE OLLABORATION ERVER V PPLIANCE DITION NSTALLATION (RMX) 1800/2000/4000 NPACK RESENCE OLLABORATION ERVER Position the Rack Spacer (3) onto the marked rack post together with left rack rail runner (item no. 1 which is labeled LEFT) and fasten the flat DDITIONAL NFORMATION head screws 3*10 mm (4) as shown in the following figure.

  • Page 26: Installing The Realpresence Collaboration Server (Rmx) 1800

    .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V (RMX) 1800/2000/4000 NPACK RESENCE OLLABORATION ERVER • On the RealPresence Collaboration Server (RMX) 2000/4000 the top hole on the Rack Spacer must be left clear as it is required for fixing the Collaboration Server to the rack post.
  • Page 27 ERVER Installing the RealPresence Collaboration Server (RMX) 1800 The Polycom RealPresence Collaboration Server 1800/2000/4000 Appliance Edition can be installed in a rack. For the RealPresence Collaboration Server 1800 system, you also need a shelf to mount it in a rack. This system can also be placed directly on a level surface.
  • Page 28 To connect RealPresence Collaboration Server (RMX) 1800 to AC power: Insert the power cable into the power connector on the rear panel of the RealPresence Collaboration Server (RMX) 1800 system. Use only the Polycom-supplied AC power cable DDITIONAL NFORMATION •...

  • Page 29: Installing The Realpresence Collaboration Server (Rmx) 2000

    Figure 1-5: RealPresence Collaboration Server (RMX) 1800-3 rear panel Installing the RealPresence Collaboration Server (RMX) 2000 The Polycom RealPresence Collaboration Server 1800/2000/4000 Appliance Edition can be installed in a rack. Install RTM ISDN Card on the RealPresence Collaboration Server (RMX)
  • Page 30 .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V (RMX) 2000 NSTALLING THE RESENCE OLLABORATION ERVER of the system. It is recommended to install the ISDN card before the system is placed in a rack. An RMX Software License is included with the ISDN card and must be regis- tered as part of the Product.
  • Page 31 .8.6 OLYCOM RESENCE OLLABORATION ERVER V PPLIANCE DITION NSTALLATION (RMX) 2000 NSTALLING THE RESENCE OLLABORATION ERVER To install RTM ISDN Card on RealPresence Collaboration Server: On the new RTM ISDN card, move the ejector levers to their fully open position. Slide in the RTM ISDN card in the RealPresence Collaboration Server slot.
  • Page 32 .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V (RMX) 2000 NSTALLING THE RESENCE OLLABORATION ERVER – Mount the RealPresence Collaboration Server on top of the rail runners. – Fasten the RealPresence Collaboration Server to the rack spacers using the flat head screw (item 8) with flat washer (item 9) through the two holes in the RealPresence Collaboration Server...
  • Page 33 .8.6 OLYCOM RESENCE OLLABORATION ERVER V PPLIANCE DITION NSTALLATION (RMX) 2000 NSTALLING THE RESENCE OLLABORATION ERVER – Fasten the RealPresence Collaboration Server to the rack with screws through the four holes in the RealPresence Collaboration Server front mounting brackets. Figure 1-9: Install the RealPresence Collaboration Server (RMX) 2000 on a shelf Connecting Cables to the RealPresence Collaboration Server (RMX) 2000 Do not remove the protective caps from LAN1, LAN3 and ShMG ports when...
  • Page 34 .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V (RMX) 2000 NSTALLING THE RESENCE OLLABORATION ERVER – Install an RTM LAN-4 port card and connect the LAN cable to LAN With Multiple Networks and LAN Redundancy configurations, connect the LAN cable to LAN 1. An RTM LAN type card is always required with Multiple Networks and LAN Redundancy configurations.

  • Page 35: Installing The Realpresence Collaboration Server (Rmx) 4000

    OLLABORATION ERVER Installing the RealPresence Collaboration Server (RMX) 4000 The Polycom RealPresence Collaboration Server 1800/2000/4000 Appliance Edition can be installed in a rack. Install RTM ISDN Card on the RealPresence Collaboration Server (RMX) 2000/4000 If the ISDN option was purchased with your RealPresence Collaboration Server, the ISDN card is shipped separately and must be manually installed into the rear of the system.
  • Page 36 .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V (RMX) 4000 NSTALLING THE RESENCE OLLABORATION ERVER Slide out the RTM LAN or RTM ISDN card. DDITIONAL NFORMATION Install RTM ISDN Card on RealPresence Collaboration Server As a first installation, the RTM ISDN card must be installed in the top slot of the RMX chassis.
  • Page 37 .8.6 OLYCOM RESENCE OLLABORATION ERVER V PPLIANCE DITION NSTALLATION (RMX) 4000 NSTALLING THE RESENCE OLLABORATION ERVER Slide in the RTM ISDN card in the RealPresence Collaboration Server slot. An RTM ISDN card must connect directly to an MPMRx DDITIONAL NFORMATION card in the opposite-facing front slot.
  • Page 38 .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V (RMX) 4000 NSTALLING THE RESENCE OLLABORATION ERVER Mounting the RealPresence Collaboration Server (RMX) 4000 in a Rack Perform the following steps to mount the RealPresence Collaboration Server (RMX) 4000 in a Rack. Rack Mount Preparations •...
  • Page 39 .8.6 OLYCOM RESENCE OLLABORATION ERVER V PPLIANCE DITION NSTALLATION (RMX) 4000 NSTALLING THE RESENCE OLLABORATION ERVER – Mount the RealPresence Collaboration Server on top of the rail runners. – Fasten the RealPresence Collaboration Server to the rack spacers using the flat head screw (item 8) with flat washer (item 9) through the two holes in the RealPresence Collaboration Server...
  • Page 40 .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V (RMX) 4000 NSTALLING THE RESENCE OLLABORATION ERVER – Fasten the RealPresence Collaboration Server to the rack with screws through the four holes in the RealPresence Collaboration Server front mounting brackets. Figure 1-15: Install the RealPresence Collaboration Server (RMX) 2000 on a shelf Install the RealPresence Collaboration Server (RMX) 4000 in a 23”...
  • Page 41 .8.6 OLYCOM RESENCE OLLABORATION ERVER V PPLIANCE DITION NSTALLATION (RMX) 4000 NSTALLING THE RESENCE OLLABORATION ERVER After removal, attach the 23” brackets as provided in the Rack Installa- tion Accessories kit, and re-install the handles to the 23” brackets, as shown in the figure below.
  • Page 42 .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V (RMX) 4000 NSTALLING THE RESENCE OLLABORATION ERVER The following restrictions apply to the conductors and connectors that may be used to ground the unit when rack mounted: Connect the Collaboration Server 4000 to AC power For systems with AC Power, up to three power supplies can be installed with one being redundant (n+1).
  • Page 43 Do not connect the green or green-yellow wire to the system single-point ground screw. • Customers are required to only use AC power cables supplied by Polycom. • The size of the protective earthing conductor should be a minimum of 10 AWG.
  • Page 44 .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V (RMX) 4000 NSTALLING THE RESENCE OLLABORATION ERVER Using the two wires of an 10 AWG cable running from the DC power distribution unit, connect the black wire into the -48 VDC terminal block and the red wire to the RTN terminal block.
  • Page 45 .8.6 OLYCOM RESENCE OLLABORATION ERVER V PPLIANCE DITION NSTALLATION (RMX) 4000 NSTALLING THE RESENCE OLLABORATION ERVER Turn ON the circuit breaker on each of the DC PEMs. On the RealPresence Collaboration Server (RMX) DDITIONAL NFORMATION 4000, two types of circuit breakers can be installed: •...
  • Page 46 .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V (RMX) 4000 NSTALLING THE RESENCE OLLABORATION ERVER Connect Cables to the RTM LAN Card of RealPresence Collaboration Server (RMX) 4000 • To connect the cables to the RTM LAN Card of RealPresence Collabora- tion Server (RMX) 4000: •...
  • Page 47 .8.6 OLYCOM RESENCE OLLABORATION ERVER V PPLIANCE DITION NSTALLATION (RMX) 4000 NSTALLING THE RESENCE OLLABORATION ERVER • Connect the E1/T1 cables to PRI. • Connect the LAN cable to LAN 1ports. When LAN redundancy is enabled, LAN 1 is used for DDITIONAL NFORMATION both management, media and signaling network connection.

  • Page 48: First Entry Power-Up And Configuration

    In the Language Menu window, click the documentation language hyperlink, for example English. In the Polycom End User Licenses Agreement window, read the agree- ment and click the Accept Agreement button. In the Product Type Selection window, click the RealPresence Collab- oration Server type hyperlink, for example RMX 2000.
  • Page 49 .8.6 OLYCOM RESENCE OLLABORATION ERVER V PPLIANCE DITION NSTALLATION IRST NTRY OWER UP AND ONFIGURATION In the LAN Configuration Utility window, modify default IP addresses to IP addresses in your local network provided by your network admin- istrator. • Control Unit IP Address (the Management IP address for the MCU) •...
  • Page 50 Activation Key. Obtain the Activation Key During first-time power-up, you need to enter an Activation Key.You can get this key from Polycom Service & Support page of the Polycom website at http://support.polycom.com. To obtain the Activation Key: Access the Service &...
  • Page 51 For more information, refer to the Collaboration Server Soft- ware License document you received with your shipment. Register all Polycom Software Licenses that you have purchased when obtaining the Activation Key. For example, ISDN, Encryption and Multiple Networks each have different Polycom Software Licenses.
  • Page 52 .8.6 PPLIANCE DITION NSTALLATION OLYCOM RESENCE OLLABORATION ERVER V IRST NTRY OWER UP AND ONFIGURATION OLYCOM RESENCE OLLABORATION ERVER ETTING TARTED UIDE...

  • Page 53: Chapter 4: Login To Realpresence Collaboration Server

    EQUIREMENTS Login to RealPresence Collaboration Server You can manage or monitor a Polycom RealPresence Collaboration Server with the RMX Web Client application, using Internet Explorer installed on your workstation, or using RMX Manager application. The RMX Manager is the Windows version of the RMX Web Client. For more information, see Polycom RealPresence Collaboration Server 1800/2000/4000 Administrator Guide.
  • Page 54 • .Net Framework 2.0is required and installed automatically. • If ActiveX installation is blocked, see ActiveX Bypass in the Polycom Real- Presence Collaboration Server 1800/2000/4000 Administrator Guide. • The RMX Web Client does not support larger Windows text or font sizes.
  • Page 55 ORKSTATION EQUIREMENTS • It is not recommended to run Collaboration Server Web Client and Polycom Resource Manager applications simultaneously on the same workstation. • If Windows 7 is installed on the workstation, protected mode must be disabled before downloading the software to the workstation.
  • Page 56 .8.6 OGIN TO RESENCE OLLABORATION ERVER OLYCOM RESENCE OLLABORATION ERVER V ORKSTATION EQUIREMENTS Clear the Enable Protected Mode check box for each of the following tabs: • Internet • Local Intranet • Trusted sites After successful connection to Collaboration Server, the Enable Protected Mode check boxes can be selected to enable Protected Mode for the following tabs: •...
  • Page 57 .8.6 OLYCOM RESENCE OLLABORATION ERVER V OGIN TO RESENCE OLLABORATION ERVER ORKSTATION EQUIREMENTS Configure Internet Explorer 8 When using Internet Explorer 8 to run the Collaboration Server Web Client or RMX Manager applications, it is important to configure the browser according to the following procedure.
  • Page 58 .8.6 OGIN TO RESENCE OLLABORATION ERVER OLYCOM RESENCE OLLABORATION ERVER V ORKSTATION EQUIREMENTS In the Delete Browsing History dialog box, select the Temporary Internet files and Cookies check boxes, then click the Delete button. The Delete Browsing History dialog box closes and DDITIONAL NFORMATION the files are deleted.

  • Page 59: Login To Realpresence Collaboration Server

    .8.6 OLYCOM RESENCE OLLABORATION ERVER V OGIN TO RESENCE OLLABORATION ERVER OGIN TO RESENCE OLLABORATION ERVER In the Temporary Internet Files and History Settings dialog box, click the View objects button. The Downloaded Program Files folder containing DDITIONAL NFORMATION the installed program files is displayed. 10.

  • Page 60: Set Available Languages In The Login Screen

    In the RealPresence Collaboration Server Web Client Login screen, enter the default Username (POLYCOM) and Password (POLYCOM) and click Login. Set available languages in the Login Screen By default, the Collaboration Server Web Client interface is displayed only in English.

  • Page 61: Default System Flags

    .8.6 OLYCOM RESENCE OLLABORATION ERVER V OGIN TO RESENCE OLLABORATION ERVER EFAULT YSTEM LAGS On the Collaboration Server menu, click Setup > Customized Display > Multilingual Setting. The Select Language window is displayed as below: DDITIONAL NFORMATION Click the check boxes of the languages, then click OK. If the selected language is not supported by the DDITIONAL NFORMATION...
  • Page 62 .8.6 OGIN TO RESENCE OLLABORATION ERVER OLYCOM RESENCE OLLABORATION ERVER V EFAULT YSTEM LAGS Table 1-2: Default System Flag Settings Field Description / Default : Selecting 2 digits NOTE Conference ID Length The number of digits of the limits the number of simulta- (MCU) Conference ID to be neous ongoing conferences to...

  • Page 63: Chapter 5: Starting Conferences Using Default Profiles

    EFAULT ROFILE Starting Conferences Using Default Profiles In the Polycom® RealPresence® Web Suite, the conferencing parameters are defined in the RealPresence CloudAxis suite using its RealPresence Virtualiza- tion Manager (DMA) component. Start a New Conference Using a Default Profile Your RealPresence Collaboration Server comes with default conference profiles, allowing you to immediately start conferences.
  • Page 64 .8.6 TARTING ONFERENCES SING EFAULT ROFILES OLYCOM RESENCE OLLABORATION ERVER V TART A ONFERENCE SING A EFAULT ROFILE In the Conferences pane, click New Conference ( ). The New Conference-General dialog box opens. DDITIONAL NFORMATION Select a conference profile from the Profile drop-down list. If you know the IP address of your participants, you can add them to your conference: click the Participants tab >...

  • Page 65: Joining A Conference Using Dialing Strings

    .8.6 OLYCOM RESENCE OLLABORATION ERVER V TARTING ONFERENCES SING EFAULT ROFILES OINING A ONFERENCE SING IALING TRINGS Starting from version 8.1 DDITIONAL NFORMATION • A license is required for SVC conferencing. • In mixed AVC/SVC conferences, participants with SVC-enabled endpoints and AVC endpoints can participate in the same conference. Joining a Conference Using Dialing Strings When you set up a conference, you can add participants that the RealPresence Collaboration Server will dial out to when the conference starts.
  • Page 66 If your conference has the following parameters: MCU Signaling Host IP address: 172.21.126.100 • Conference routing name: test_25248795 • MCU domain name: polycom.com • SIP participants can dial one of the following strings to join the conference: test_25248795@polycom.com • test_25248795@172.21.126.100 •...
  • Page 67 .8.6 OLYCOM RESENCE OLLABORATION ERVER V TARTING ONFERENCES SING EFAULT ROFILES OINING A ONFERENCE SING IALING TRINGS Conference IDs appear in the Conferences pane. DDITIONAL NFORMATION View Your MCU Signaling Host IP Address or MCU Prefix in Gatekeeper You may need to know your MCU Signaling Host IP Address or MCU Prefix so as to compose the dialling string.
  • Page 68 .8.6 TARTING ONFERENCES SING EFAULT ROFILES OLYCOM RESENCE OLLABORATION ERVER V OINING A ONFERENCE SING IALING TRINGS Your Singling Host IP address and MCU Prefix in Gatekeeper appear in the IP Network Service row. DDITIONAL NFORMATION View Your Conference Routing Name You may need your conference routing name so as to compose the dialling string.
  • Page 69 .8.6 OLYCOM RESENCE OLLABORATION ERVER V TARTING ONFERENCES SING EFAULT ROFILES OINING A ONFERENCE SING IALING TRINGS In the Conferences pane, right-click your conference and select Conference Properties. DDITIONAL NFORMATION Your routing name can be found in the General tab. You can also set your routing name when you create DDITIONAL NFORMATION...
  • Page 70 .8.6 TARTING ONFERENCES SING EFAULT ROFILES OLYCOM RESENCE OLLABORATION ERVER V OINING A ONFERENCE SING IALING TRINGS OLYCOM RESENCE OLLABORATION ERVER ETTING TARTED UIDE...

This manual is also suitable for:

Realpresence 2000Realpresence 4000

Table of Contents