Polycom RealPresence 1800 Administration Manual page 392

Collaboration server
Hide thumbs Also See for RealPresence 1800:
Table of Contents

Advertisement

For both of non-modular MCU and modular MCU, to upgrade from any versions earlier than version 8.5 to
version 8.7.1, the intermediate upgrade to 8.5, 8.6 or the maintenance releases of both versions is needed.
Virtual Edition Modular MCU Upgrade Storage Requirements
If the modular MCU is virtual edition, sufficient storage for modular MCU and its soft blades is required:
● For modular MCU storage requirements, see
● For soft blades storage requirements, see
In case of insufficient storage, the upgrade will not start, and an active alarm "Insufficient storage space for
upgrade" will be raised.
Monitor Soft Blades Upgrade
The modular MCU and its soft blades upgrade process can be monitored through the RMX Management >
MMCU System Monitor.
● If soft blades upgrade normally, Upgrading displays in each soft blade row.
The following table shows other soft blades status and behaviors:
Soft blade status and expected behavior
Status
Pending authentication
Soft blade pending
authentication
Rejected
Initializing
Ready
Faulty
Disconnected
Disabled
● If any soft blades failed to be upgraded, Upgrade failed displays in the modular MCU row.
 During the modular reboot process, once the modular MCU is verified as an invalid system, the
modular MCU will use the previous version software instead and issue an active alarm, in this
case, the soft blades will be downgraded automatically to match the main MCU version.
 You can manually install the new version software on soft blades, which failed to be upgraded. For
information of installing soft blades, see
 Only the soft blades are upgraded successfully will work actively with the modular MCU.
Polycom, Inc.
Virtual Edition Host Server Platform
Soft Blade
Behaviors
No action.
Once the modular MCU is authenticated it will be upgraded.
No action.
Once the soft blade is authenticated it will be upgraded.
Remain rejected.
Start upgrade.
Start upgrade.
Start upgrade.
No action.
Start upgrade.
Deployment of Soft Blades in a Modular
Prerequisites.
Appendix - Modular MCU
Profile.
MCU.
371

Advertisement

Table of Contents
loading

This manual is also suitable for:

Realpresence 2000Realpresence 4000

Table of Contents