Polycom RealPresence 1800 Administration Manual page 214

General System Flags
Flag Name
H263_ANNEX_T
H264_HD_GRAPHICS_MIN_CONT
ENT_RATE
H264_HD_HIGHRES_MIN_CONTE
NT_RATE
H264_HD_LIVEVIDEO_MIN_CONT
ENT_RATE
H264_VSW_AUTO=NO
H323_FREE_VIDEO_RESOURCES
Polycom, Inc.
Description
When set to NO, this flag sends the content stream
without Annex T and enables Aethra and Tandberg
endpoints, that don't support Annex T to process the
content.
Default value: YES
Possible values: YES/NO
Determines the minimum content rate required for
endpoints to share H.264 high quality content
through the Content channel When Content Setting
is Graphics.
Default value: 128 Kbps
Range: 0-1536 Kbps
Determines the minimum content rate required for
endpoints to share H.264 high quality content
through the Content channel When Content Setting
is Hi Resolution Graphics.
Default value: 256 Kbps
Range: 0-1536 Kbps
Determines the minimum content rate (in kbps)
required for endpoints to share H.264 high quality
content through the Content channel When Content
Setting is Live Video.
Default value: 384 Kbps
Range: 0-1536 Kbps
When set to NO, disables the highest common
mechanism in H.264 and enables selection of H.264
Video Protocol in fixed mode in Dual Stream Video
Switching cascading conferences.
Possible values: YES/NO
For use in the Avaya Environment.
In the Avaya Environment there are features that
involve converting undefined dial-in participants'
connections from video to audio (or vice versa). To
ensure that the participants' video resources remain
available for them, and aren't released for use by
audio only calls, set this flag to NO.
If set to YES, the RealPresence Collaboration
Server will release video resources for Audio Only
calls.
Default value: YES
Possible value: YES/NO
System Flags
Platform Add?
HW/VE No
HW/VE Yes
HW/VE Yes
HW/VE Yes
HW/VE Yes
193