Polycom RealPresence 1800 Administration Manual page 127
Collaboration server
Hide thumbs
Also See for RealPresence 1800:
- Administrator's manual (1113 pages) ,
- Getting started manual (70 pages) ,
- Hardware manual (18 pages)
Table of Contents
Advertisement
General Participant Properties
Field
Alias Name/Type
(H.323 Only)
SIP Address/Type
(SIP Only)
Endpoint Website IP
Address
(IP only)
Polycom, Inc.
Description
Select the type of Alias for the endpoint (based on communication protocol) and then enter
the endpoint's alias:
•
H.323 ID (alphanumeric ID)
•
E.164 (digits 0-9, * and #)
•
Email ID (email address format, e.g. abc@example.com)
•
Participant Number (digits 0-9, * and #)
Notes:
•
Although all types are supported, the type of alias is dependent on the gatekeeper's
capabilities. The most commonly supported alias types are H.323 ID and E.164.
•
This field is used to enter the Entry Queue ID, target Conference ID and Conference
Password when defining a cascaded link.
•
Use of the E.164 Number is dependent on the setting of the
REMOVE_IP_IF_NUMBER_EXISTS System Flag.
Select the format of the SIP address and then enter the endpoint's SIP Address. :
•
SIP URI - Uses the format of an E-mail address, typically containing a user name and a
host name: sip:[user]@[host]. For example, sip:dan@polycom.com.
Note: If the SIP Address field contains an IPv6 address, it must be surrounded by
square brackets, for example, [::1].
•
TEL URI - Used when the endpoint does not specify the domain that should interpret a
telephone number that has been input by the user. Rather, each domain through which
the request passes would be given that opportunity.
For example, a user in an airport might log in and send requests through an outbound proxy
in the airport. If the users enters "411" (this is the phone number for local directory
assistance in the United States), this number needs to be interpreted and processed by the
outbound proxy in the airport, and not by the user's home domain. In this case, tel: 411 is
the correct choice.
IP address of the endpoint's internal site to enable connection to it for management and
configuration purposes.
This field is automatically completed the first time that the endpoint connects to the
Collaboration Server. If the field is blank it can be manually completed by the system
administrator. The field can be modified while the endpoint is connected
Address Book
106
Advertisement
Table of Contents
