Polycom RealPresence 1800 Administration Manual page 212

General System Flags
Flag Name
FORCE_LEGACY_EP_CONTENT_
LAYOUT_ON_TELEPRESENCE
FORCE_RESOLUTION
FORCE_STATIC_MB_ENCODING
FORCE_SYSTEM_BROADCAST_V
OLUME
Polycom, Inc.
Description
To ignore personal layouts during Telepresence
conferences (while working with MLA), set the value
of the flag
FORCE_LEGACY_EP_CONTENT_LAYOUT_ON_T
ELEPRESENCE to YES.
If the layout for displaying content in Legacy
endpoints includes multiples cells, the MCU might
populate Telepresence room streams sources in
remote cells.
NO (Default) - The MCU does not manage the
layouts while Content is sent. Personal layout
changes, for example, by MLA, override the default
MCU layout. Legacy endpoints might not display
Content in Telepresence conferences due to layout
changes.
YES - The MCU manages the layouts while Content
is sent. Personal layout changes, for example,
by MLA, are ignored. The layouts for legacy
endpoints are managed by the MCU.
Use this flag to specify IP (H.323 and SIP) endpoint
types that cannot receive wide screen resolution and
that weren't automatically identified as such by the
RealPresence Collaboration Server.
Possible values are endpoint types, each type
followed by a semicolon. For example, when
disabling wide screen resolution in an HDX
endpoint, enter the following string: HDX.
Note: Use this flag when the flag
SEND_WIDE_RES_TO_IP is set to YES.
This flag supports Tandberg MXP mode of sending
and receiving video by IP endpoint in HD 720p
resolution and Video Quality set to Motion. This
mode is not supported for ISDN-video endpoints.
Default value: Tandberg MXP.
To disable this flag, enter NONE.
When set to YES, the level of broadcasting volume
of the connected participant is value taken from the
system flag SYSTEM_BROADCAST_VOLUME.
If set to NO (default), the broadcasting volume level
is 5.
Default value: NO
Possible values: YES/NO
System Flags
Platform Add?
HW/VE Yes
HW/VE Yes
HW/VE No
191