Polycom RealPresence 1800 Administration Manual page 228

General System Flags
Flag Name
QOS_IP_AUDIO
QOS_IP_VIDEO
QOS_MANAGEMENT_NETWORK
REALLOC_UPDATE_SCM
REDIAL_INTERVAL_IN_SECONDS
Polycom, Inc.
Description
Used to select the Diffserv priority of audio packets
when DiffServ is the selected method for packet
priority encoding.
For any given DSCP level, set the flag to the full 8-bit
hexadecimal value of the DS/TOS byte, which
contains the DSCP level as its upper six bits.
For example, assuming that a DSCP level of 34
decimal is required: the binary representation of 34
is 0b100010, which, when placed into the upper six
bits of the DS/TOS byte, becomes 0b[100010]00, or
0b1000 1000 = 0x88 hex. Thus, set the flag value
equal to 0x88.
Default value: 0x30
Used to select the Diffserv priority of video packets
when DiffServ is the selected method for packet
priority encoding.
For any given DSCP level, the flag must be set to
the full 8-bit hexadecimal value of the DS/TOS byte,
which contains the DSCP level as its upper six bits.
For example, assuming that a DSCP level of 34
decimal is required: the binary representation of 34
is 0b100010, which, when placed into the upper six
bits of the DS/TOS byte, becomes 0b[100010]00, or
0b1000 1000 = 0x88 hex. Thus the flag value should
be set equal to 0x88.
Default value: 0x30
Enter the DSCP value for RealPresence
Collaboration Server Management Network.
Default value: 0x10
Range: 0x00 - 0x3F
Set the system flag to YES in case that
RealPresence Collaboration Server increasing video
resource consumption during the reallocation. For
example, after hold and resume, increasing video
resource consumption can lead to lose the video
connection.
Default value: NO
Possible Value: YES/NO
Note: Requires MCU reset.
Enter the number of seconds that the RealPresence
Collaboration Server should wait before successive
redialing attempts.
Default value:10
Range: 0-30
System Flags
Platform Add?
HW/VE Yes
HW/VE Yes
HW/VE Yes
HW/VE Yes
HW/VE Yes
207