Participant Properties - Polycom RealPresence 1800 Administration Manual

Participant Properties

The following tables list the conference parameters that you can enable on the RealPresence Collaboration
Server.
General Participant Properties
Field
Name
Endpoint Website
Dialing Direction
Type
IP Address
(H.323 and SIP)
Polycom, Inc.
Description
Unique name that identifies the participant or the participant's endpoint within RMX
Manager.
The maximum field length for the Display Name is:
• 80 ASCII characters.
• 40 European and Latin text characters
• 25 Asian text characters
Do not use comma or semi-colon characters in this field.
This name may be displayed in the video layout.
Hyperlink that connects to the internal website of the participant's endpoint, which allows
you to perform administrative, configuration and troubleshooting activities if required.
The connection is available only if the IP address of the endpoint's internal website is
defined in the Website IP Address field.
Select the dialing direction:
• Dial-in – The participant dials in to the conference. This field applies to IP participants
only.
• Dial-out – The MCU dials out to the participant.
The network communication protocol used by the participant's endpoint to connect to the
conference: H.323, or SIP.
The fields in the dialog box change according to the selected network type.
IP address of the participant's endpoint.
• For H.323 participant enter either the endpoint IP address or the endpoint Alias.
• For SIP participant enter either the endpoint IP address or the endpoint SIP address.
For Collaboration Servers registered to a gatekeeper, the MCU can be configured to dial
and receive calls to and from H.323 endpoints using the IP address in the event that the
Gatekeeper is not functioning.
Address Book
105