Downloading The Oam Program; Changing Communication Configuration Settings; Figure 3-2 Oam Startup Window - Polycom KIRK 8000 Configuration Manual

Polycom KIRK Wireless Server 8000 Configuration Guide

Downloading the OAM Program

Changing Communication Configuration Settings

8
You can download the OAM program from www.polycom.com
To Install the KWS8000 OAM Program
• Double-click KIRK_Wireless_Server_8000_x.x.x.xx_setup.exe, and then
follow the instructions to install the program.
To Start the KWS8000 OAM Program
Click the Start menu, point to All Programs, point to Kirk Wireless Server
8000, and then click Kirk Wireless Server 8000. The Kirk Wireless Server
startup window appears.
Figure 3-2 OAM Startup Window
The lower part of the window shows the current communication settings used
for connecting to the DECT system. The default communication setting is
COM1 via null-modem cable for direct connection between a PC and KWS8000.
Baud
Data bit
Parity
Stop bit
Flow control
You can change communication configuration settings from the Startup
window or from the File menu when the program is running.
Table 3-1 Default COM port setting
115200
8
None
1
CTS, TS, DSR, DTR, DCD
Downloading the OAM Program
Polycom, Inc.