To view the current list of conference profiles:
» In RMX Manager, go to RMX Management > Rarely Used > Conference Profiles.
Add a New Conference Profile
Conference profiles specify the parameters best suited for your conferencing software and hardware
environments. Use the default profiles or add new profiles specific to your conferencing environment.
To add a new conference profile:
1 In RMX Manager, go to RMX Management > Rarely Used > Conference Profiles.
2 In the Conference Profiles pane, click New Profile (
3 In the Display Name field, enter a unique and identifiable name for the profile and select the
required Conferencing Mode.
The New Profile tabs and options change based on the selected conferencing mode and the MCU
model (appliance edition or virtual edition). Only supported options are available on each tab.
When CP (Continuous Presence) is selected, all tabs are available.
When SVC Only is selected, the General, Advanced, Video Quality, Video Settings, Audio
Settings, IVR, and Network Settings tabs are available.
When CP and SVC is available, all tabs except the Gathering Settings tab, are available.
4 Select and edit the parameters you wish to define.
General Parameters
Advanced Parameters
Gathering Settings - Not available when CP and SVC or SVC Only conferencing modes are
selected
Video Quality Parameters
Video Settings Parameters
Audio Settings Parameters
IVR Parameters
Recording Parameters - Not available when SVC Only conferencing mode is selected
Site Names Parameters - Not available when SVC Only conferencing mode is selected
Message Overlay Parameters - Not available when SVC Only conferencing mode is selected
Network Services Parameters
Layout Indications Parameters - Not available when SVC Only conferencing mode is selected
For detailed information about the conferencing parameters, see
5 Click OK to save the new profile.
Polycom, Inc.
Conference Profiles and Templates
).
Conference Profile Parameters
.
26