Polycom RealPresence 1800 Administration Manual page 238

General System Flags
Flag Name
TIMEOUT_BETWEEN_IVR_AND_FI
RST_DIGIT
USE_GK_PREFIX_FOR_PSTN_CA
LLS
V35_MULTIPLE_SERVICES
V35_ULTRA_SECURED_SUPPORT
VIDEO_BIT_RATE_REDUCTION_P
ERCENT
VIDEO_ENCODER_CHANGE_LAY
OUT_REQ
Polycom, Inc.
Description
The timeout between IVR message and DTMF input.
Default value: 99 (seconds)
Range: 0, 1-10, 99
Note: If 99 is configured, the timeout will be identical
to the existing timeout value configured through
Timeout for User Input parameter.
When set to YES, the gatekeeper prefix is included
in the DTMF input string enabling ISDN-voice
participants to use the same when connecting to
RealPresence Collaboration Server. Applicable for
RealPresence Collaboration Server as a standalone
MCU or as part of a RealPresence DMA solution
deployment.
Default value: NO
Possible Values: YES/NO
This flag must be set to YES if the connection of
multiple Serial Gateways to RTM-LAN cards is
required.
The default value of this system flag is NO, enabling
only one Serial Gateway to be supported per
RTM-LAN card.
Possible values: YES/NO
Note: Not Supported in RealPresence Collaboration
Server 1800.
When deploying a Serial Gateway S4GW, set this
flag to YES. This flag is applicable regardless of the
security mode.
Possible values: YES/NO
Indicates the percentage of actual reduction in bit
rate sent from the RealPresence Collaboration
Server to the endpoint (negotiated bit rate is not
reduced). This flag is applicable only when traffic
shaping is enabled.
Default value: 15
Range: 0-60
ENABLE_RTP_TRAFFIC_SHAPING
This flag contains a new parameter
IsLyncVideoMuted and can take the following
values:
• 0 - To not display any doughboy image for the
Microsoft Lync participants.
• 1 - To display doughboy image for the Microsoft
Lync participants.
System Flags
Platform Add?
HW/VE Yes
HW/VE No
HW/VE Yes
HW Yes
HW/VE Yes
217