Cascade Enabled Participant Link - Polycom RealPresence 1800 Administration Manual
Collaboration server
Hide thumbs
Also See for RealPresence 1800:
- Administrator's manual (1113 pages) ,
- Getting started manual (70 pages) ,
- Hardware manual (18 pages)
Table of Contents
Advertisement
● Create a cascade-enabled Dial-out Participant link in the Master conference
● Create a cascade-enabled Dial-in Participant link in the Slave conference.
Cascade Enabled Participant Link
The connection between two cascaded conferences is established by a cascade enabled dial-out and dial-in
participants, acting as a cascades link.
The dialing direction determines whether the dial-out participant is defined in the conference running on the
Master MCU or the Slave MCU. For example, if the dialing direction is from the Master conference on level
1 to the Slave conference on level 2, the dial-out participant is defined in the Master conference on level 1
and a dial-in participant is defined in the Slave conference running on the MCU on level 2.
If the cascade-enabled dial-out participant always connects to the same destination conference on the other
(second) MCU, the participant properties can be saved in the Address Book of the MCU for future repeated
use of the cascaded link.
New Participant - General
New Participant – Dial-out Cascade Link
Field
Name
Polycom, Inc.
Description
Enter the participant's name.
This field may not be left blank. Duplicate participant names, comma, and
semi-colon characters may not be used in this field.
Cascading Conferences
82
Advertisement
Table of Contents
