Enabling Auto Scan - Polycom RealPresence 1800 Administration Manual

To display the video preview window, the display system must meet the following minimum system
requirements:
● DirectX is installed
● DirectDraw Acceleration is enabled and no other application is using the video resource
● Hardware acceleration is enabled
Refer to the system documentation for information about how to enable these options. If the video card
installed in the PC does not support DirectDraw Acceleration, a black window may be viewed.
Note the following:
● RealPresence Collaboration Server supports Video Preview in AVC CP conferences only
● Live video shown in the preview window does not include shared content being sent by the participant
● Video preview is supported in cascaded conferences
● Video preview is disabled in encrypted conferences
● Video preview is not displayed when the participant's video is suspended
To preview the participant video:
1 In the RMX Manager Conferences List, select the active conference of interest.
2 From the conference Participants pane, select the participant whose video you want to preview.
3 Right-click and select one of the following options:
 View Participant Sent Video - To display the video sent from the participant to the conference.
 View Participant Received Video - To display the video sent from the conference to the
participant.
The Video Preview window opens.

Enabling Auto Scan

When the number of participants in a conference is greater than the number of cells in the conference layout,
you can display those extra participants within a single designated cell in the conference layout. Auto Scan
only takes effect when the number of participants is larger than the number of cells in the conference layout.
RealPresence Collaboration Server supports Auto Scan in AVC CP conferences only
Polycom, Inc.
Working with Active Conferences
60