Polycom RealPresence 1800 Administration Manual page 69

General Conference Parameters
Field
Chairperson Password
Reserve Resources for
Video Participants
(Appliance Edition only)
Reserve Resources for
Audio Participants
(Appliance Edition only)
Maximum Number of
Participants
Enable ISDN
(audio/video) Dial-in
ISDN (audio/video)
Network Service
Dial-in Number (1)
Dial-in Number (2)
5 To make the conference recurring, click Schedule and enter the required scheduling and recurrence
information.
6 Click Participants and add participants from the Address Book or click New and enter the required
information for new participants.
7 If required, chose a participant as a lecturer and as needed enable Dial Out Manually, so the MCU
can dial out to the lecturer.
Polycom, Inc.
Description
Password that the chairperson must enter to join the conference with chairperson
responsibilities. If left blank, chairperson functionality is not enabled for the conference.
This password is valid only in conferences that are configured to prompt for a
chairperson password.
By default, this password is 4 numeric characters. The administrator can modify
requirements for this field. For more information, see
The MCU can be configured to automatically generate this password when this field is
left blank. For more information, see
Number of video participants for which the system must reserve resources.
Default: 0 participants.
Maximum participants:
• MPMRx-D / RMX1800: 100
• MPMRx-S: 30
Number of audio participants for which the system must reserve resources.
Default: 0 participants.
Maximum participants:
• MPMRx-D / RMX1800: 300
• MPMRx-S: 90
Total number of participants that can join to the conference. Choose Automatic to allow
resource availability to determine the maximum number of participants that can join the
conference.
Note: If a number is specified, it should be large enough to accommodate the
participants specified in the Reserve Resources for Video/Voice Participants fields.
Allows ISDN-video and ISDN-voice participants to join directly to the conference.
Choose the pre-defined network service that best suites your conferencing
environment. Identifies the pre-defined Network Service.
Unique dial-in number for the conference. Choose this number from the dial-in number
range defined for the selected Network Service.
If left blank, the MCU automatically assigns a number from the dial-in range defined for
the selected ISDN (audio/video) Network Service.
Second unique dial-in number for the conference. Again, choose this number from the
dial-in number range defined for the selected Network Service.
By default, the second dial-in number is not defined.
Conference Management
System Flags
System Flags .
.
48