Installing Activex; Collaboration Server Reset - Polycom RealPresence 1800 Administration Manual

All workstation that connect to Collaboration Server systems must have both.NET Framework and .NET
Security Settings running locally. These components are used for communication with the Collaboration
Server and can only be installed on workstations by users with administrator privileges.
The MSI utility requires the IP addresses of all the Collaboration Server systems (both control unit and Shelf
Management IP addresses) that each workstation is to connect to.
If the IP address of the any of the target Collaboration Servers is changed, the ActiveX components must
be reinstalled.

Installing ActiveX

To install ActiveX components on all workstations in the network:
1 Download the MSI file EMA.ClassLoaderInstaller.msi from the Polycom Resource Center.
2 The MSI file contains installation scripts for both .NET Framework and .NET Security Settings.
3 Create a text file to be used during the installation, containing the IP addresses of all the
Collaboration Servers (both control unit and Shelf Management IP addresses) that each workstation
in the network should connect.
The file must be named url_list.txt and must be saved in the same folder as the downloaded MSI file.
4 Install the ActiveX components on all workstations on the network that connect to Collaboration
Server systems.
The installation is done by the network administrator using a 3rd party network software installation
utility and is transparent to all other users.

Collaboration Server Reset

There are separate procedures for resetting Collaboration Servers 2000/4000/1800 and Collaboration
Server Virtual Edition.
Polycom, Inc.
Administration and Utilities
159