Polycom RealPresence 1800 Administration Manual page 224

General System Flags
Flag Name
MS_KEEP_ALIVE_ENABLE
MS_PROXY_REPLACE
MSFT_AVMCU_MUTE_AUDIENCE
_TRIGGERS_MUTE_ALL_BUT_ME
_IN_RMX_CONFERENCE
MTU_SIZE
NUM_OF_INITIATE_HELLO_MESS
AGE_IN_CALL_ESTABLISHMENT
NUMBER_OF_REDIAL
Polycom, Inc.
Description
Enables the Microsoft Keep Alive flag.
When set to YES, this flag ensures that endpoints
such as HDX remain connected to the conference
for its duration when the RealPresence
Collaboration Server is configured with FQDN
address and Lync server is working with load
balancing holding more than one address.
Default value: NO
Possible values: YES/NO
Note: The functionality of this flag has been replaced
with the following system flags:
• SIP_TCP_KEEP_ALIVE_TYPE
• SIP_TCP_KEEP_ALIVE_BEHAVIOR
Enables the proxy=replace parameter in the SIP
Header. When set to YES, the outbound proxy
replaces the contact information in the contact
header on its own. This enables other clients and
servers to reach the client using the proxy's IP
address, even if the client is behind a firewall.
Default value: YES
Possible Values: YES/NO
In an AVMCU call, the originator of the conference
can selectively to mute all participants or only mute
the Skype for Business participants.
Default value: YES
Possible Values: YES/NO
Determines the maximum packet size created by the
encoder.
Default value: 1120
Range: 400 - 1440
Indicates the number of times a Hello message is
sent from the RealPresence Collaboration Server to
an endpoint in an environment that includes a
session border controller (SBC) with a 3-second
interval between messages.
Default value: 3
Range: 1 -10
Enter the number redialing attempts required.
Dialing might continue until the conference is
terminated.
Default value: 3
System Flags
Platform Add?
VE Yes
HW/VE Yes
HW/VE Yes
HW/VE Yes
HW/VE Yes
HW/VE Yes
203