Modifying The Master Mcu Configuration; Audible Alarms - Polycom RealPresence 1800 Administration Manual
Collaboration server
Hide thumbs
Also See for RealPresence 1800:
- Administrator's manual (1113 pages) ,
- Getting started manual (70 pages) ,
- Hardware manual (18 pages)
Table of Contents
Advertisement
Hot Backup Triggers
Hot Backup Trigger
Lost connection with signalling port
Lost connection with ISDN
(audio/video) card
4 Alternatively, click Trigger Failover Manually when you want to trigger the Hot Backup manually
and activate the Slave MCU.
A confirmation message is displayed.
5 Click Yes to continue the Hot Backup process or No to cancel the Hot Backup process.
6 Click OK.
Modifying the Master MCU Configuration
Modifications to the configuration of the Master MCU that require a System Reset cannot be performed
while Hot Backup is enabled.
To modify the Master MCU configuration:
1 In RMX Manager, go to Setup > Hot Backup.
2 Disable the Hot Backup on the Master and Slave MCUs.
3 Modify the Master MCUs configuration.
4 Reset the Master MCU.
5 When the reset is complete, enable Hot Backup on the Master and Slave MCUs.
6 If required, reset the Slave MCU.
Audible Alarms
In addition to the visual cues used to detect events occurring on the Collaboration Server, an audible alarm
can be activated and played when participants request Operator Assistance.
The Audible Alarm functionality for Operator Assistance requests is enabled for each MCU via either the
RMX Web Client or RMX Manager.
The Audible Alarm played when Operator Assistance is requested, is enabled and selected using Setup >
Audible Alarm > User Customization.
When an Audible Alarm is activated, the *.wav file selected in the User Customization is played, and is
repeated according to the number of repetitions defined in the User Customization.
Polycom, Inc.
Description
Initiates the Hot Backup switch from the Master to the Slave MCU
when the connection with an active signaling port is inactive for a
duration of 30 seconds on the Master MCU. A system flag,
ETH_INACTIVITY_DURATION, can be added and configured to
modify the duration of inactivity of the signaling port. Default value
is 30 seconds; Minimum value is 20 seconds.
Initiates the Hot Backup switch from the Master to the Slave MCU
when the connection with an ISDN (audio/video) card is
disconnected on the Master MCU.
Administration and Utilities
140
Advertisement
Table of Contents
