Polycom RealPresence 1800 Administration Manual page 52

Video Quality Parameters
Field Description
Multiple Available only when CP (Continuous Presence) conferencing mode is selected.
Content
Enables content sharing in multiple streams, one for each video protocol: H.263 and H.264. This
Resolutions
allows endpoints with different protocols to connect and disconnect without having to restart
content sharing.
When enabled, choose which content protocols and resolutions to use for each stream of
content.
• Content Protocol
 Transcode to H.264 is always selected
 Use H.263
 Use H.264 if available, otherwise use H.263
 Use H.264 cascade and SVC optimized
 Use H.264 HD
• Content Resolution—Specify the fixed resolution and frame rate of the content channel for
content sharing in cascaded conferences. Available only when Content Protocol is set to
H.264 cascade and SVC optimized. The content resolutions available for selection depend
on the content sharing mode (highest common or multiple content resolutions), line rate and
content settings selected for the conference.
Send Content Available only when CP (Continuous Presence) conferencing mode is selected.
to Legacy
When enabled, content can be sent over the video (people) channel to H.323/SIP/ISDN-video
Endpoints
endpoints that do not support H.239 content.
Select this option when Avaya IP Softphone will be connecting to the conference.
H.264 High Applies to Appliance Editions only. Displayed only when conferencing mode is VSW (Video
Profile Switching), or the selected Content Protocol is H.264 Cascade Optimized.
In scenarios where endpoints not supporting high profile (such as HDX) are connected to the
conference, it is recommended to clear this check-box to enable them to share content.
Enable MS When enabled, the MCU starts conferences on Modular MCUs (MMCU) that have sufficient soft
RDP Content blade resources. MMCUs may be configured with an RDP translator that converts H.264 content
shared from a standard endpoint to RDP content to deliver to a Skype ASMCU. Likewise, when a
Skype client shares RDP content, the RDP translator delivers H.264 content to the MMCU.
Notes:
• For Polycom RealConnect calls to work, set 'AllowMultiView' to TRUE on the Skype for
Business Front End Server. This will enable the participants to connect and receive multiple
video streams.
• This option can be used in place of a separate Polycom
Polycom, Inc.
Conference Profiles and Templates
® ContentConnect™ gateway solution.
31