Polycom RealPresence 1800 Administration Manual page 208

General System Flags
Flag Name
ENABLE_SELECTIVE_MIXING
ENABLE_SIP_PEOPLE_PLUS_CO
NTENT
ENABLE_SIP_PPC_FOR_ALL_USE
R_AGENT
ENABLE_SIRENLPR
ENABLE_SIRENLPR_SIP_ENCRY
PTION
ENABLE_TC_PACKAGE
ENABLE_TEXTUAL_CONFERENC
E_STATUS
Polycom, Inc.
Description
You need to manually add this flag and enable or
disable the function by changing the value to
YES/NO. MCU reset isn't required when changing
the system flag value.
Possible values: YES/NO
If security is of a higher priority than SIP Content
sharing, SIP People+Content
disabled by setting this system flag to NO. (The
content management control (BFCP) uses an
unsecured channel (port 60002/TCP) even when
SIP TLS is enabled).
Default value: YES
Possible values: YES/NO
When set to YES, SIP People+Content and BFCP
capabilities are declared with all vendors' endpoints.
Default value: YES
Possible values: YES/NO
Enables or disables the Polycom
Packet Recovery Audio Algorithm for use in IP
(H.323, SIP) calls in both CP and VSW conferences.
Default value: NO
Possible values: YES/NO
®
Enables the Polycom Siren
audio algorithm when using encryption with the SIP
protocol.
Default value: YES
Possible values: YES/NO
Enables or disables the Network Traffic Control.
Default value: NO
Possible values: YES/NO
Set the flag value to NO to disable Text Indication.
This setting is recommended for MCUs running
Telepresence conferences.
Default value: YES
Possible values: YES/NO
™
technology can be
® ™
Siren Lost
™
Lost Packet Recovery
System Flags
Platform Add?
Yes
HW/VE Yes
HW/VE Yes
HW/VE Yes
HW/VE Yes
HW/VE Yes
HW/VE Yes
187