Polycom RealPresence 1800 Administration Manual page 200

General System Flags
Flag Name
CONTENT_SLAVE_LINKS_INTRA_
SUPPRESSION_IN_ SECONDS
CP_REGARD_TO_INCOMING_SET
UP_RATE
CPU_BONDING_LINK_MONITORI
NG_FREQUENCY
Polycom, Inc.
Description
Defines the interval when RealPresence
Collaboration Server is allowed to forward an Intra
Request received from any of the Slave Cascading
Links. The Slave Cascading Link can be connected
to the local RealPresence Collaboration Server, to
an MCU on a higher cascade level or to the content
sharer.
The first Intra request that is received from any of the
subordinate MCUs connected to the RealPresence
Collaboration Server starts the interval counter and
is forwarded to the next level MCU or to the content
sharer.
All other Intra requests that are received within this
interval are registered but ignored. After an interval,
the system checks if during the last interval any
additional intra requests were registered. If there is
at least one Intra request it will be forwarded. If there
is no additional Intra request, no action is taken
other than to wait for the next cycle.
This filtering process is repeated every <flag value>
second.
Default value:30 seconds
For use in the Avaya environment.
When set to YES, the RealPresence Collaboration
Server calculates the line rate for incoming calls in
CP conferences, according to the line rate which is
declared by the endpoint in the H.225 setup
message.
When set to NO, the rate is calculated according to
the conference line rate regardless of the rate in the
H.225 setup message.
Default value: YES
Possible values: YES/NO
Used when using the MII Monitor for troubleshooting
networks. This flag sets the MII Polling Interval in
milliseconds. A value of zero disables the MII
monitoring.
Default value: 100
System Flags
Platform Add?
HW/VE No
HW/VE Yes
HW/VE Yes
179