Polycom RealPresence 1800 Administration Manual page 445

2 In the RMX Web Client Login screen, enter the default Username (POLYCOM) and Password
(POLYCOM) and click Login.
The Fast Configuration Wizard launches.
For more information on First-time Power-up and the Fast Configuration Wizard see Polycom
RealPresence Collaboration Server Getting Started Guide.
Configure the Primary Management Network
To configure the primary management network:
1 Enter the following parameters into the Fast Configuration Wizard using the information supplied by
your network administrator:
 Control Unit IP Address
 Shelf Management IP Address
 Control Unit Subnet Mask
 Default Router IP Address
2 Click Save & Close.
The system prompts you to sign in with the new Control Unit IP Address.
3 Disconnect the LAN cable between the workstation and the LAN 2 Port on the Collaboration
Server's back panel.
4 Connect LAN 2 Port on the Collaboration Server's back panel to the local network using a LAN
cable.
5 Enter the new Control Unit IP Address in the browser's address line, using a workstation on the
local network, and press Enter to start the RMX Web Client application.
6 In the Collaboration Server Web Client Login screen, enter the default Username (POLYCOM) and
Password (POLYCOM) and click Login.
Connect the Alternate Management Network
(2000/4000)
The Alternate Management Network enables direct access to the RealPresence Collaboration Server for
support purposes. The Alternate Management Network cannot be configured and operates on factory
defaults.
The Alternate Management Network is only accessible using a LAN cable, connecting the pre-configured
workstation to the appropriate port on the RealPresence Collaboration Server:
● RealPresence Collaboration Server (RMX) 2000 — LAN 3 port
● RealPresence Collaboration Server (RMX) 4000 — LAN 1 port
Polycom, Inc.
Appendix - Direct Connection to the RealPresence Collaboration Server
424