Polycom RealPresence 1800 Administration Manual page 215

General System Flags
Flag Name
HD_THRESHOLD_BITRATE
HW_FOLLOW_SPEAKER_RESOL
UTION_ON_1X1_LAYOUT
IGNORE_AIM
RPCSVE_ENHANCE_CAPACITY
Polycom, Inc.
Description
The value of this flag is the system minimum
threshold bitrate for HD resolutions. The line rate
selected in the Conference Profile must be the same
of higher than specified by this flag.
Default value: 768 Kbps
Range: 384 Kbps - 4 Mbs
Enables endpoints capable of higher resolution in a
conference where some endpoints are lower than
4CIF and others are higher to receive the Indication
icons.
Possible values:
• AUTO (default) - When any of the Indication icons
are configured for display, do not follow the
speaker. When the Indication icons are not
configured for display, follow the speaker.
• YES - Always follow the speaker in 1x1 layout.
• NO - Never follow the speaker in 1x1 layout.
Audio Indicate Muted (AIM) is relevant to H.323
endpoints. When an endpoint mutes its microphone,
it does not necessarily mute its entire audio stream.
This allows sharing of content that includes audio
while microphones are muted.
Default value: NO
Possible values:
NO - When the AIM signal is received, the
participant is muted and a mute icon is displayed in
the RMX Web Client or RMX Manager.
YES - When the AIM signal is received, the
participant is not muted and a mute icon is not
displayed in the RMX Web Client or RMX Manager.
Range: YES, NO
Setting this flag to "YES" results in rejection of all
Mixed mode conferences, since in this case
AVC-only and SVC-only are the only conference
modes supported. This flag can be enabled to
achieve a higher capacity for a given hardware and
virtual machine configuration.
Default value: NO
Possible values: YES/NO
System Flags
Platform Add?
HW/VE No
HW No
HW Yes
VE
194