Modifications To The Master Mcu Requiring System Reset - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server 800s Administrator's Guide
2
3
4
5

Modifications to the Master MCU Requiring System Reset

Modifications to the configuration of the Master MCU that require a System Reset cannot be
performed while Hot Backup is enabled.
To modify the Master MCU configuration:
1
2
3
4
5
20-32
A dialog box opens with a list of event triggers displayed.
Select the appropriate Hot Backup Triggers check boxes:
Table 20-18 Hot Backup Trigger
Hot Backup Trigger
Lost connection with
management port
Alternatively, click the Trigger Failover Manually button when you want to trigger the
Hot Backup manually and activate the Slave MCU.
A confirmation message is displayed.
Click Yes to continue the Hot Backup process or click No to cancel the Hot Backup
process.
Click OK.
Disable the Hot Backup on the Master and Slave MCUs.
Modify the Master MCUs configuration.
Reset the Master MCU.
When the reset is complete, enable Hot Backup on the Master and Slave MCUs.
If required, reset the Slave MCU.
Description
Initiates the Hot Backup switch from the Master to the
Slave MCU when the connection to the management port
is lost on the Master MCU. This trigger is always set.
Polycom, Inc.