Information Page; System Configuration - Polycom KIRK Wireless Server 8000 Interface Configuration Manual

Information page

Information page

System Configuration

Polycom, Inc.
If you have an issue to report about a site, then those files are required with
the report.
To start/stop capture of scenario
Repeate steps 1 and 2 from
1
Click the Start capture of scenario button. The Grab Events is ended and
2
the trace level is set to 5.
Click the Stop capture button. The Grab Events begins and the trace level
3
is set back to previous value.
On the System menu, click Information. The System Information page is
1
displayed.
Figure 4-2 System Information page
Click Refresh to load the information.
2
The System Information page displays hardware and interface information for
each shelf and for each slot in each shelf.
You can view the following information about hardware product change status
(HW PCS) for each slot in each shelf, and information about which Interface
card is used for each slot in each shelf. Furthermore, you can view information
about which software version is currently used. The following figure provides
an example of the information that is displayed on the System information tab.
This section includes the following information:
• 'Setting the Outgoing Analogue Line
• 'Allowing Subscription'
To Get Service Report archive
Prefix'
General System Settings
section.
16