System Configuration; Configuration For Cpu Direct Connection (Rs-422) - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
17.2

System Configuration

The MP900/CP9200SH machine controller can be directly connected to the GOT via RS-422 or RS-
232C. This section explains the cables and options required in such a system.
Connectable Model and Connector Shape
The table below shows applicable models and their connector shape.
Model
CP9200SH
MP920
MP930
17.2.1

Configuration for CPU Direct Connection (RS-422)

Connect the MP900/CP9200SH machine controller to the COM port of the MEMOBUS unit and the RS-
422 communication port of the GOT.
The GOT-F900 and the machine controller can be connected on the 1:1 basis.
1) F930GOT/F930GOT-K/F940GOT/F940WGOT
GOT-F900
F930GOT
F940GOT
F943GOT
a) Machine controller
CP-217IF
- Applicable machine controller product in the column a) is a MEMOBUS unit equipped with built-in RS-422
interface.
Connection of Machine Controller CP9200SH (PLC Manufactured by Yaskawa Electric) 17
Machine controller
Unit
CN1
CP-217IF CN2
CN3
PORT1
CPU equipped
with built-in ports
PORT2
CN1
CP-217IF CN2
CN3
PORT1
CPU equipped
with built-in ports
PORT2
b) RS-422 cable
Dedicated 8-pin
Prepared by the user
connector
Port Connector shape
RS-232C 9-pin D-Sub, male
RS-232C 25-pin D-Sub, male
RS-422 8-pin connector, male
RS-232C 9-pin D-Sub, male
RS-232C 9-pin D-Sub, male
RS-232C 9-pin D-Sub, male
RS-232C 9-pin D-Sub, male
RS-422 8-pin connector, male
RS-232C 9-pin D-Sub, male
RS-232C 9-pin D-Sub, male
MEMOBUS unit
CP-217IF
b) RS-422 cable
GOT
Remarks
a) Machine controller
CP9200SH,MP920
Remarks
MEMOBUS unit
17-2