Mitsubishi Electric F920GOT-K Hardware Manual page 144

GOT-F900 SERIES (CONNECTION)
3) Switch OFF operation
a) Basic operation
While the grip switch is set valid in the Handy GOT, it controls the operations of touch keys,
numerical inputs and ASCII inputs (hereafter referred to as touch keys as representative).
While the grip switch is being pressed (ON status), the touch key operation is enabled as follows.
While the grip switch is released (OFF status), the touch key operation is disabled and any opera-
tion from the touch panel is disabled.
Grip switch
Touch switch
operation
Touch switch ON/
OFF operation
b) ON/OFF operation timing
When "SWITCH OFF ACTION" is set to "TOUCH KEY OFF"
While the grip switch is ON, the touch key ON operation is executed when the touch key turns
ON.
Grip switch
Touch switch
operation
Touch switch ON/
OFF operation
Important point
The (momentary) touch key operation is not related to the grip switch ON/OFF status. When the
touch key turns OFF from ON, the control target bit device is set to OFF.
When "SWITCH OFF ACTION" is set to "GRIP SWITCH OFF"
While the grip switch is ON, the touch key ON operation is executed when the touch key turns
ON.
Grip switch
Touch switch
operation
Touch switch ON/
OFF operation
Important point
The (momentary) touch key operation is related to the grip switch ON/OFF status. Even while a
touch key is ON, the control target bit device is set to OFF when the grip switch is released.
c) Others
When the grip switch is pressed while the screen is blacked out by the screen save function, the
screen save function is released and the screen display becomes active.
ON
OFF
ON
OFF
ON operation
OFF operation
ON
OFF
ON
OFF
ON operation
OFF operation
ON operation
ON
OFF
ON
OFF
ON operation
OFF operation
ON operation
Installation and Wiring of Handy GOT 5
The ON/OFF operation is disabled.
This is important.
OFF operation The ON/OFF operation is disabled.
This is important.
OFF operation The ON/OFF operation is disabled.
5-42