Connection Of Freqrol (S500/E500/A500) Inverter - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
13.

Connection of FREQROL (S500/E500/A500) Inverter

This chapter explains the procedure to connect the GOT-F900 Series display unit to the FREQROL
Series (S500/E500/A500) inverter.
Connection Procedure
This section introduces the procedure to connect the GOT-F900 to the FREQROL Series inverter.
1.
Preparation
Item name
System Condition
System Configuration
2.
Setting
Item name
Setting in FREQROL
Inverter
Cautions on Use of
FREQROL Series
Inverter
Correspondence
between GOT Devices
and Parameters
FREQROL Inverter
Parameter List
Setting of Connected
Equipment for GOT
3.
Others
Item name
Cable Diagram
Troubleshooting
Connection of FREQROL (S500/E500/A500) Inverter 13
You can learn the connection availability as well as the version of the
GOT-F900 OS and the screen creation software.
You can select the configuration between the GOT and the FREQROL
inverter and proper cables.
When INVCPU connection is selected, the GOT-F900 is automatically set
to fixed values. No setting is required in the FRQROL inverter.
You can learn the restrictions in connecting the GOT to the FREQROL
inverter.
You can learn correspondence between GOT devices and parameters as
well as communication.
You can compare parameters of the A500, the E500 and the S500.
Set the PLC type using the GOT or the screen creation software.
Cable diagrams for FREQROL inverter/GOT connection
Description of errors and how to fix them
Description
Description
Description
11
12
13
Reference
13.1
13.2
14
Reference
13.3
15
13.4
13.5
13.6 16
13.7
Reference
17
13.8
13.9
18
19
20
13-1