Mitsubishi Electric F920GOT-K Hardware Manual page 450

GOT-F900 SERIES (CONNECTION)
2) GT Designer2
[Creation]
Connection of FLEX-PC N Series PLC (Manufactured by Fuji Electric) 16
Operation
a)Open GT Designer2.
b)Click the [NEW] button.
The dialog box shown below is displayed.
If it is not displayed, click "System Environment" in the tree
displayed in the project work space, then click "System settings"
in the tree.
c)Set the following.
GOT type: F940WGOT (480 × 234)
F94*GOT (320 × 240)
F93*GOT (240 × 80)
PLC type:Fuji-N
Selection of "GOT type"
GOT type
F940WGOT(480×234)<WIDE>
F94*GOT(320×240)
F930GOT(240×80)
Click [OK].
Model name (name)
F940WGOT
F940GOT
Handy GOT
F930GOT
F930GOT-K
Display (screen name)
The "Select Project"
dialog box appears.
The "System
Environment" dialog box
appears.
16-8