Wiring Between Handy Got (Rh Model) Operation Switches And Connected Equipment - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
5.4.2

Wiring between Handy GOT (RH model) operation switches and connected equipment

1) F940 Handy GOT
Connect the cable to
the port inside the
rear cover.
When connecting via RS-232C ports, make sure that the distance between the Handy GOT and PLC
is 11.5m (37' 9") or less.
Name
a) External cable
b) Relay cable for PLC connection
c) Relay cable for PLC connection
d) Relay cable for PLC connection
CN1(8-pin)
CN2(20-pin)
CN4(5-pin)
CN5(4-pin)
CN6(3-pin)
CN7(2-pin)
a)
a)
a)
For the details, refer to 5.4.3.
Model name
F9GT-RHCAB-3M(3m, 9' 10")
F9GT-RHCAB-6M(6m, 19' 8")
F9GT-RHCAB-10M(10m, 32' 10")
F9GT-RHCAB2-150(1.5m, 4' 11")
F9GT-RHCAB3-150(1.5m, 4' 11")
Prepared by user
CN1:For power supply
CN2:For communication
CN4:For grip switch
CN5:For emergency stop switch
CN6:For keylock switch
CN7:Not to be wired
Installation and Wiring of Handy GOT 5
For the details, refer to 5.6.2.
b)
To FX /FX
0
FX /FX
0N
FX Series PLC
2NC
To power supply and
operation switches
c)
To FX/FX
Series PLC
To power supply and
operation switches
For the details, refer to 5.6.2.
For the details, refer to 5.6.2.
d)
To computer link unit,
microcomputer board or
another company's PLC
To power supply and
operation switches
Remarks
One side: 37-pin D-Sub
Cable outside diameter: 12.2mm(0.48")
For connecting FX Series CPU
PLC side: 8-pin MINI DIN
For connecting FX/A/QnA Series CPU
PLC side: 25-pin D-Sub
/FX /
0S 1S
/FX /
1N 2N
/A/QnA
2C
5-16