Mitsubishi Electric F920GOT-K Hardware Manual page 137

GOT-F900 SERIES (CONNECTION)
3) Lighting of LEDs for confirming operation
A green LED is provided for each of four operation switches SW1 to SW4 and one grip switch so that
pressing of each switch can be confirmed.
Each LED is assigned to a bit device by the screen creation software. When the value of a bit device
is "1", the corresponding switch is lit. When the value is "0", the corresponding switch is
extinguished.
a) Assignment of devices controlling the LEDs
Device
M100
M101
M102
M103
M104
b) Setting in the screen creation software
The head device for the LEDs of the operation switches should be set in the screen creation soft-
ware.
For the details, refer to section 5.14.
c) Program example
The operation switches SW1, SW2, SW3 and SW4 are assigned to X0, X1, X2 and X3 respec-
tively. The grip switch is wired to X4.
The device of "Output Indicator" is set to M100 in the screen creation software.
In a sequence program, inputs X0 to X4 are assigned to M100 to M104 using the OUT instruction.
X0
X3
X4
Name
Operation switch SW1 (green)
Operation switch SW2 (green)
Operation switch SW3 (green)
Operation switch SW4 (green)
Grip switch (green)
M100 . . . . . When the SW1 is pressed, the LED lights in green.
M103 . . . . .When the SW4 is pressed, the LED lights in green.
M104 . . . . . The LED of the grip switch lights in green.
Installation and Wiring of Handy GOT 5
← Set this device using the screen creation software.
The LEDs for the operation switches and grip switch
can be allocated successively.
← Valid when the OS version is 6.00 or later
1
2
3
4
5
6
7
8
9
10
5-35