Connection Of Machine Controller Cp9200Sh (Plc Manufactured By Yaskawa Electric); System Condition - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
17. Connection of Machine Controller CP9200SH (PLC Manufactured by
Yaskawa Electric)
This chapter explains the procedure to connect the GOT-F900 Series display unit to the MP900/
CP9200SH machine controller.
Connection Procedure
This section introduces the procedure to connect the GOT-F900 to the MP900/CP9200SH machine
controller.
1.
Preparation
Item name

System Condition

System Configuration
2.
Setting
Item name
Setting in Machine
Controller
Setting of Connected
Equipment for GOT
3.
Others
Item name
Cable Diagram
Troubleshooting
17.1 System Condition
When connecting the machine controller MP900/CP9200SH, check the COM port designation, the OS
version of the GOT-F900, and applicable versions of the screen creation software.
Compatibility when connecting Machine Controller CP9200SH
GOT-F900
Series
F920GOT-K
F930GOT
F930GOT-K
F940GOT
F940WGOT
F940 Handy GOT
F943 Handy GOT
- The screen creation software version corresponds to connection of the machine controller CP9200SH.
Refer to section 3.2.

Connection of Machine Controller CP9200SH (PLC Manufactured by Yaskawa Electric) 17

You can learn the connection availability as well as the version of the
GOT-F900 OS and the screen creation software.
You can select the configuration between the GOT and the machine
controller MP900/CP9200SH and proper cables.
You can learn the communication specifications and the contents of setting.
Communication
The communication specifications set in the
Setting
machine controller.
Specifications
Set the PLC type using the GOT or the screen creation software.
Cable diagrams for Machine controller/GOT connection
Description of errors and how to fix them
COM port Connection type
Two or more
RS-422 RS-232C 1:1
GOT units
− − −
$ $ $
$ $ $
$ $ $
$ $ $
−
$ $
−
$ $
Description
Description
Description
Version of screen creation
OS version
of GOT-F900
GT
Designer2
− −
−
3.00 SW1-C
−
4.60 SW1-C
−
5.00 SW1-C
−
1.00 SW1-C
−
5.00 SW1-C
−
5.00 SW1-C
Reference
17.1
17.2
Reference
17.3
17.3.1
17.4
Reference
17.5
17.6
software
GT
DU/WIN
Designer
− − −
−
SW4-F
−
SW5-26C
−
SW4-F
−
SW5-F
−
SW4-F
−
SW4-F
17-1
11
12
13
14
15
16
17
18
19
20