Connection Of Bar Code Reader - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
22.

Connection of Bar Code Reader

This chapter explains the procedure to connect the GOT-F900 Series display unit to the bar code
reader.
If equipment such as PLC or printer is connected to the RS-232C port of the GOT-F900, the bar code
reader cannot be connected.
Connection Procedure
This section introduces the procedure to connect the GOT-F900 to the bar code reader.
1.
Preparation
Item name
System Condition
Connection Configuration
2.
Setting
Item name
Bar Code Reader
Communication Setting
Caution on Use of Bar
Code Reader
Setting of Connected
Equipment for GOT
3.
Others
Item name
Cable Diagram
Troubleshooting
You can learn the connection availability as well as the version of the
GOT-F900 OS and the screen creation software.
You can select the configuration between the GOT and the bar code
reader and proper cables.
You can learn the communication specifications and the contents of
devices.
Transmission
Specifications The communication specifications and the
and format of the GOT. Align the setting in the bar
Communication code reader with the setting in the GOT.
Format
Bar Code
Functions of control devices of the bar code
Reader Control
reader.
Devices
Bar Code Data Rules on how the bar code data read by the
Setting bar code reader is stored.
Sequence
Program The outline of the sequence program.
Example
You can learn the cautions on connecting the personal computer while
the bar code reader is connected.
Set the devices used in communication with the PLC using the screen
creation software.
Cable diagrams for bar code reader/GOT connection
Description of errors and how to fix them
Connection of Bar Code Reader 22
Description
Description
Description
21
22
23
Reference
22.1
22.2
Reference
22.3
22.3.1
22.3.2
22.3.3
22.3.4
22.4
22.5
Reference
22.6
22.7
22-1