Troubleshooting - Mitsubishi Electric F920GOT-K Hardware Manual

Got-f900 series graphic operation terminal
Table of Contents

Advertisement

GOT-F900 SERIES (CONNECTION)
19.9

Troubleshooting

For reference, this section summarizes frequently asked questions about connection of the GOT-F900 to
the SLC500/MicroLogix Series PLC manufactured by Allen-Bradley.
1) GOT-F900
Contents of trouble
"COMMUNICATION
ERROR OCCURS" is
displayed when a
screen changeover or
numeric data input is
performed on the
GOT-F900 screen.
"DISPLAY SCREEN
IS NOT AVAILABLE."
is displayed on the
GOT-F900 screen.
"DISPLAY SCREEN
IS NOT AVAILABLE.
(NO. ####)" is
displayed on the GOT-
F900 screen.
"DISPLAY SCREEN
IS NOT AVAILABLE."
is displayed on the
GOT-F900 screen.
Connection of SLC500/MicroLogix Series PLC (Manufactured by Allen-Bradley) 19
Check points and countermeasures
The power of the SLC500/MicroLogix Series PLC is turned off.
• Cause
Communication is disabled because the power of the
SLC500/MicroLogix Series PLC is turned off.
• Countermeasures
Turn on the power.
Something is wrong with the cable between the GOT-F900 and
the SLC500/MicroLogix Series PLC.
• Causes
The wrong cable is used or the connection is bad.
• Countermeasures
Check the cable.
Changeover to a nonexistent screen by a touch key or the
SLC500/MicroLogix Series PLC was tried.
• Cause
The changeover destination screen has not been created yet.
• Countermeasures
Create the screen.
A nonexistent screen was tried to be displayed.
• Cause
The screen No. #### has not been created yet.
• Countermeasures
Create the screen.
A device that does not exist in the SLC500/MicroLogix Series
was referenced. (Example: While an SLC500 is connected, a
device exists only in the MicroLogix is specified for numeric
input.)
• Cause
On the changeover destination screen (excluding the head
screen), a nonexistent device in the connected SLC500/
MicroLogix Series PLC is specified.
• Countermeasures
Check the devices used on the head screen.
There is an error on the screen to be displayed.
• Cause
One of the screen objects is placed outside the available
screen area.
• Countermeasures
Check the placement of screen objects.
OS version
F940W
F940
F930
From
From
From
first
first
first
product
product
product
Earlier
Earlier
than
than
6.00
4.00
From
6.00
4.00
first
or
or
product
later
later
Earlier
Earlier
than
than
6.00
4.00
19-19
11
12
13
14
15
16
17
18
19
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents