System Configuration; Configuration For Cpu Direct Connection (Rs-232C) - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
18.2

System Configuration

The FP Series PLC can be directly connected to the GOT RS-232C using a control unit, CPU unit or
computer communication unit. This section explains the cables and options required in such a system.
18.2.1

Configuration for CPU Direct Connection (RS-232C)

The FPΣ/FP0 Series control unit and the FP2SH Series CPU unit is equipped with built-in tool port and
COM port (RS-232C interface). Only one GOT unit can be connected to an either interface.
1) F920GOT-K (24V type)/F930GOT/F930GOT-K/F940GOT/F940WGOT
GOT-F900
F930GOT
F940GOT
FP0 Series
FP0-T32CT
FP2SH Series
FP2-C2
FP2SH Series
FP2-C2+FP2-CCU
FPΣ Series
FPG-C32T
FPΣ Series
FPG-C32T+FPG-COM1
FPG-C32T+FPG-COM2
- Applicable FP Series products in the column a) are control units, CPU units and computer communication
units equipped with built-in RS-232C interface.
Connection of FP Series PLC (Manufactured by Matsushita Electric Works) 18
b) RS-232C cable
a) FP
Prepared by the user
5-pin MINI DIN
(tool port)
Prepared by the user
3-wire type
(RS-232C COM port)
Prepared by the user
5-pin MINI DIN
(tool port)
Prepared by the user
3-wire type
(RS-232C COM port)
Prepared by the user
9-pin D-Sub
(RS-232C COM port)
Prepared by the user
5-pin MINI DIN
(tool port)
Prepared by the user
3-wire type
(RS-232C COM port)
a) FP Series
CPU direct connection
b) RS-232C cable
Cable AFC8503S manufactured by
Matsushita Electric Works is available.
COM port may not be built in some
models.
Cable AFC8503S manufactured by
Matsushita Electric Works is available.
Cable AFC8503S manufactured by
Matsushita Electric Works is available.
Remarks
18-3
11
12
13
14
15
16
17
18
19
20