Configuration For A Computer Link Connection (Rs-232C) - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
9.2.3

Configuration for A Computer Link Connection (RS-232C)

The GOT-F900 and the computer link unit can be connected on the "1:1" basis.
Because the programming connector of the PLC is not occupied, peripheral programming equipment
(dedicated equipment) for PLC can be connected for monitoring and transfer of sequence programs.
1) F920GOT-K (24V type)/F930GOT/F930GOT-K/F940GOT/F940WGOT
GOT-F900
F930GOT
F940GOT
a) A Series PLC
A1SJ71C24-R2
A1SJ71UC24-R2
A1SCPUC24-R2
A2CCPUC24
AJ71UC24
- Applicable A Series PLC products in the column a) are computer link units equipped with built-in RS-232C
interface.
2) F943 Handy GOT
GOT-F900
Handy GOT
(RS-232C)
a) A Series PLC
A1SJ71C24-R2
A1SJ71UC24-R2
A2CCPUC24
A1SCPUC24-R2
AJ71UC24
- In the (C)F9GT-HCAB1-3M shown in the column "b) RS-232C cable", the end on the PLC side is loose
wires.
- Make sure that the total cable extension distance "(A) + (B)" or (C) is 6m (19' 8") or less.
b) RS-232C cable
b) RS-232C cable
9-pin D-Sub Prepared by the user.
25-pin D-Sub F -232CAB-1
2
b) RS-232C cable
(A)
Total extension distance: 6m (19' 8") or less
b) RS-232C cable
(A) F9GT-HCAB-3M
(B) Prepared by the user.
9-pin D-Sub
(C) F9GT-HCAB1-3M
25-pin D-Sub
Connection of MELSEC-A Series PLC 9
a) A Series PLC
A computer link
(B)
To power supply
and operation
switches
(C)
To RS-232C,
power supply
and operation
switches
Remarks
Make sure the total cable
extension distance is 15m
(49' 3") or less.
a) A Series PLC
A computer link
Remarks
9-7
1
2
3
4
5
6
7
8
9
10