System Configuration; Configuration For Cpu Direct Connection (Rs-232C) - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
20.2

System Configuration

The SIMATIC S7-200/300/400 Series PLC can be directly connected to the GOT via RS-232C. This
section explains the cables and options required in such a system.
20.2.1

Configuration for CPU Direct Connection (RS-232C)

Connect the connector on the PPI side of the PC/PPI cable (6ES7 901-3BF20-0XA0) to the SIMATIC
S7-200 Series CPU, then connect the connector on the PC side to the RS-232C communication port of
the GOT.
Connect the HMI adapter (6ES7 972-0CA11-0XA0) to the SIMATIC S7-300/400 Series CPU, then
connect the RS-232C port of the HMI adapter to the RS-232C port of the GOT with a dedicated cable
(6ES7 972-0CA10-0XA0).
1) F920GOT-K (24V type)/F930GOT/F930GOT-K/F940GOT/F940WGOT
GOT-F900
F930GOT
F940GOT
F943GOT
SIMATIC S7-200 Series (Excluding the 5V type F920GOT-K.)
a) SISMAC S7
212
214
215
216
221
222
224
SIMATIC S7-300 Series
a) SISMAC S7
312IFM
313
314
314IFM
315
315-2DP
316
Connection of SIMATIC S7-200/300/400 Series PLC (Manufactured by Siemens AG) 20
b) PC/PPI cable
PC
HMI Adapter
b) RS-232C
cable
b) PC/PPI cable
6ES7 901-3BF20-0XA0 cable
manufactured by Siemens AG
9-pin D-Sub
(connector of
PC/PPI cable)
b) RS-232C cable
Prepared by the user
6ES7 972-0CA00-0XA0 cable
9-pin D-Sub
manufactured by Siemens AG is also
(port of HMI
available.
adapter)
a) SIMATIC S7 Series
CPU direct connection
PPI
SIMATIC S7-200 Series
a) SIMATIC S7 Series
CPU direct connection
Dedicated
cable
SIMATIC S7-300 Series
SIMATIC S7-400 Series
Remarks
Remarks
11
12
13
14
15
16
17
18
19
20
20-3