Cable Diagram - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
4) DU/WIN
[Creation]
For selection of
RS-232C/RS-
422, refer to e) in
[Creation] above.
21.6

Cable Diagram

This section explains a cable diagrams to connect the GOT-F900 and the printer (equipped with the RS-
232C interface).
1) Cable for the GOT and the printer
No.
a) Prepared by the user
Operation
a)Open DU/WIN.
b)Read the file of the screen data for which printer connection is to
be set.
c)Set the transmission specifications.
Select "View/Project"-"System Settings"-"DU Printer" on the
menu.
Set properly "Speed", "Handshake", etc., within the transmission
specifications range for communication with the printer.
After setting, click the [OK] button.
For the available transmission specifications, refer to section 21.3.
: Female type
Model name
RS-232C
connection
9-pin D-Sub, female
: Male type
The connector figure shows the engagement face.
Application Connection diagram
GOT-F900
(2)
5 1
(3)
(6)
(8)
9 6
(5)
(4)
Connection of Printer 21
Display (screen name)
The "DU Printer Settings"
dialog box appears.
Application
FG(Grounding)
RD(RXD)
SD(TXD)
Printer
DR(DSR)
CS(CTS)
SG(GND)
ER(DTR)
21-7
21
22
23