Mitsubishi Electric F920GOT-K Hardware Manual page 515

GOT-F900 SERIES (CONNECTION)
e)Set the following.
[Change method] Change the connection type of the already created data as follows.
a)Open GT Designer.
b)Click the [Open] button.
c)Open (read) the screen data to be changed.
d)On the menu, select "Common"-"GOT/PLC Type".
Connection of SLC500/MicroLogix Series PLC (Manufactured by Allen-Bradley) 19
Operation
In the case of SW4D5C-GOTR-PACKE earlier than version A,
perform the setting in the GOT-F900.
(Set the connection in "CONNECTION" in the GOT-F900.)
For the setting method, refer to "(1) GOT-F900 Series" on the
previous page.
Port : RS-232C
Type : CPU
DST Station No. (Station No.) : 00 to 31
GOT Station No. (−)
- For the contents of setting, refer to c) of [Creation] above.
- For selection of the RS-232C on the SLC500 and MicroLogix
Series PLCs, refer to e) of [Creation] above.
: −
Display (screen name)
The "Select Project"
dialog box appears.
The "GOT/PLC Type"
dialog box appears.
19-15
11
12
13
14
15
16
17
18
19
20