Others - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
PLC by Siemens
CPU direct connection (RS-232C)
By connecting the HMI adapter to the SIMATIC S7-300 Series CPU, one GOT-F900 unit can be
connected to the SIMATIC S7-300 Series CPU.
By connecting the PC/PPI cable to the SIMATIC S7-200 Series CPU, one GOT-F900 unit can be
connected to the SIMATIC S7-300 Series CPU.
(A personal computer, printer or bar code reader can be connected only when the GOT is equipped
with two RS-232C channels.)
C P U
S I M A T I C S 7 - 3 0 0 S e r i e s
S I M A T I C S 7 - 2 0 0 S e r i e s
*1 Excluding the 5V type F920GOT-K.
2.2.3

Others

Not only the PLC, a printer or bar code reader can be connected to the GOT-F900.
The connection shown below is available also in the Handy GOT. However, because the rear panel of
the Handy GOT must be removed when a cable is connected to the RS-232C connector, the waterproof
ability and the operability (operation of the Handy GOT while it is held by hand) are lost. Accordingly, the
connection shown below is not practical for the Handy GOT.
Printer
Connection of printer (RS-232C)
When a printer is connected to the GOT-F900, the alarms and contents of screens (as hard copy)
can be printed.
R S - 2 3 2 C
P r i n t e r
*1 Excluding the F920GOT-K and Handy GOT
Bar code reader
Connection of bar code reader
When a bar code reader is connected to the GOT-F900, bar codes can be read.
R S - 2 3 2 C
B a r c o d e r e a d e r
*1 Excluding the F920GOT-K and Handy GOT
H M I A d a p t e r
P C / P P I C a b l e
R S - 2 3 2 C
G O T - . 9 0 0
* 2
*2 Excluding the F920GOT-K.
P O W E R
G O T - . 9 0 0
* 1
P O W E R
G O T - . 9 0 0
* 1
E i t h e r o n e u n i t * 2
P O W E R
R S - 2 3 2 C
P r i n t e r B a r c o d e r e a d e r
* 1
Outline 2
1
2
3
4
5
6
7
8
9
10
2-9