Mitsubishi Electric F920GOT-K Hardware Manual page 101

GOT-F900 SERIES (CONNECTION)
[Switch setting] g)Click the [Keys] button.
h)Allocate a switch operation to an External Key (n) in the "Keys" list
Caution on setting of "Output Indicator"
1.The contents of "Output Indicator" you have set are not displayed on the screen.
2.The setting of "Output Indicator" is valid only in the F920GOT-K, F930GOT-K and Handy GOT.
Never set it in any other series.
3.Set "Output Indicator" only on the common screen. Even if it is set on a user screen, it does not
function.
4.Make sure that the bit device assigned on the "Output Indicator" dialog box is not included in the bit
device range in set "View/Project"-"System Settings"-"Interface Devices".
Function key setting procedure and cautions
The switch operations can be set to devices (external keys 0 to 7) corresponding to F1 to F8.
The setting method and operations are the same as 'function allocation' for touch keys, however, note
that no key code setting is available.
Table of function key allocation
DU/WIN
External Key 0
External Key 1
External Key 2
External Key 3
External Key 4
External Key 5
External Key 6
External Key 7
Installation and Wiring of F920GOT-K/F930GOT(-K)/F940(W)GOT 4
Operation
pressing the [Add] button.
Refer to Setting of function key below.
F920GOT-K F930GOT-K
F1
F2
F3
F4
F5
F6
Cannot be used
Cannot be used
Screen of DU/WIN
"*" mark indicates switch operation has
already allocated.
F1
F2
F3
F4
F5
F6
F7
F8
Display (screen name)
The "Keys Scr. Common"
window appears.
4-31
1
2
3
4
5
6
7
8
9
10