Mitsubishi Electric F920GOT-K Hardware Manual page 330

GOT-F900 SERIES (CONNECTION)
3) GT Designer
[Creation]
Operation
a)Open GT Designer.
b)Click the [New] button.
c)Set the following.
GOT type: F940WGOT (480 × 234) <WIDE>
F94*GOT (320 × 240)
F93*GOT (240 × 80)
PLC type: FX(2N)-10GM/20GM
Selection of "GOT type"
GOT type
F940WGOT(480×234)<WIDE>
F94*GOT(320×240)
F93*GOT(240×80)
Click [OK].
d)Set CPU direct connection (RS-422) of the GOT-F900.
Click the check box of "Use Serial Port, Setup, Language, Menu
Key" to give a check mark ($).
Click the "Setup" tab.
e)Set the following.
Port : RS-422
Type : CPU
DST Station No. (Station No.) : 00
GOT Station No. (−)
In the case of F943 Handy GOT
Without regard to the port setting (RS-422 or RS-232C), the
COM0 side of the RS-232C is fixed for PLC connection.
Connection of FX Series Positioning Unit (FX(2N)-10/20GM) 12
Model name
F940WGOT
F940GOT
Handy GOT
F930GOT-K
F930GOT
: −
Display (screen name)
The "Select Project"
dialog box appears.
The "GOT/PLC Type"
dialog box appears.
The "Project Auxiliary
Settings" dialog box
appears.
12-8