Configuration For Direct Connection (Rs-422) - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
9.2.1

Configuration for Direct Connection (RS-422)

Connect the GOT-F900 to the programming port of the A Series PLC.
Program transfer and monitoring are available in the GOT-F900 Series using the built-in two-port
interface function through connection of a personal computer to the RS-232C port. (excluding the
F920GOT-K)
When using the GX Developer, however, pay attention to the GOT-F900 OS version. (Refer to 6.6.)
1) F920GOT-K/F930GOT/F930GOT-K/F940GOT/F940WGOT
GOT-F900
F930GOT
F940GOT
F920GOT-K
a) A Series PLC
ACPU direct connection
(25-pin D-Sub)
F930GOT/F930GOT-K/F940GOT/F940WGOT
a) A Series PLC
ACPU direct connection
(25-pin D-Sub)
- Only one of the cables listed in column b) is required for connection.
- In the F930GOT and the F930GOT-K, the FX-50DU-CABL right-angle type (L type) cable can not be
used.
a) A Series PLC
ACPU direct connection
b) RS-422 cable
Not enabled with F920GOT-K
Connection of two or more GOT units
. . .
b) RS-422 cable
Prepared by the user.
b) RS-422 cable
FX-40DU-CAB
FX-40DU-CAB-""M
FX-50DU-CABL
Connection of MELSEC-A Series PLC 9
Remarks
Make sure the total cable extension
distance is 3m (9' 10") or less.
Remarks
"""" in "FX-40DU-CAB-""M"
indicates the cable length.
9-3
1
2
3
4
5
6
7
8
9
10