Mitsubishi Electric F920GOT-K Hardware Manual page 281

GOT-F900 SERIES (CONNECTION)
e)Set the following.
[Change method] Change the connection type of the already created data as follows.
a)Open the DU/WIN.
b)On the menu, select "File"-"Open".
c)Select and open (read) the file of the screen data to be changed.
d)When changing "Terminal" (GOT-F900), select "View/Project"-
- The "PLC" selection item display varies depending on the software version as follows.
DU/WIN
Version
Connection setting availability
*1 Note that the selection item display is changed from "MELSEC-A, QnA" to "MELSEC-A" and "MELSEC-
QnA, Q".
Operation
Port: RS-422
RS-232C
Type: CPU
LINK
DST Station No. (Station No.) : 0 to 15
GOT Station No. (−)
In the case of F943 Handy GOT
Without regard to the port setting (RS-422 or RS-232C), the
COM0 side of the RS-232C is fixed for PLC connection.
Combinations of "Port" and "Type" are as follows.
Connection destination
QnA CPU direct connection
A computer link unit
QnA computer link unit
A computer link unit
QnA computer link unit
"System Settings"-"Project settings" on the menu.
- For the contents of setting, refer to c) of [Creation] above.
- For selection of the RS-422 or the RS-232C on the QnA Series
PLCs, refer to e) of [Creation] above.
"PLC System" selection item display in DU/WIN
MELSEC-A
2.00 or later
Not available
(A computer link connection is available.)
Connection of MELSEC-QnA Series PLC 10
: −
Port Type Station number
CPU 0
RS-422 LINK 0 to 15
CPU 0
LINK 0 to 15
RS-232C
CPU 0
MELSEC-A,QnA
2.30 or later
Available
Display (screen name)
The "Open" dialog box
appears.
The "Project settings"
dialog box appears.
*1
MELSEC-A
MELSEC-QnA, Q
2.40 or later
Available
(Select "MELSEC-QnA,Q".)
10-21
1
2
3
4
5
6
7
8
9
10