Mitsubishi Electric F920GOT-K Hardware Manual page 467

GOT-F900 SERIES (CONNECTION)
17.4 Setting of Connected Equipment for GOT
The setting for connection to the machine controller MP900/CP9200SH can be executed using the GOT-
F900 and the screen creation software (GT Designer2, GT Designer or DU/WIN).
1) GOT-F900 Series
When the main menu screen change operation is disabled.
a)While pressing and holding the upper left corner of the screen,
turn on the power. Keep holding the upper left corner for about
25 seconds more.
Then, press "END" at the upper right corner.
b)Press "PLC TYPE".
c) Set the following.
PLC TYPE:YASKAWA CP9200SH
CONNECTION:CPU PORT (RS-422)
DST STATION # (STATION #) : 01 to 16 ("00" is treated as "01".)
GOT STATION # (−)
When the main menu screen change operation is enabled.
a)Press the upper left corner of the screen. (The position to be
pressed can be changed in the GOT and the screen creation
software.)
b)Press "OTHER MODE" on the menu.
c) Press "SET-UP MODE" on the menu.
d)Press "PLC TYPE".
e)Set the following.
PLC TYPE: YASKAWA CP9200SH
CONNECTION:CPU PORT (RS-422)
DST STATION # (STATION #) : 01 to 16 ("00" is treated as "01".)
GOT STATION # (−)
- When the screen data is transferred to the GOT-F900, the old data including the PLC type, connection type,
and station number are overwritten.
Connection of Machine Controller CP9200SH (PLC Manufactured by Yaskawa Electric) 17
Operation
CPU PORT (RS-232C)
: −
Operation
CPU PORT (RS-232C)
: −
Display (screen name)
The "LANGUAGE" screen appears.
The "SET-UP MODE" screen appears.
The "PLC TYPE" screen appears.
Display (screen name)
The "SELECT MODE" screen appears.
The "OTHER MODE" screen appears.
The "SET-UP MODE" screen appears.
The "PLC TYPE" screen appears.
11
12
13
14
15
16
17
18
19
20
17-7