Setting Of Connected Equipment For Got - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
15.8

Setting of Connected Equipment for GOT

The setting for connection to the SYSMAC C Series PLC can be executed using the GOT-F900 and the
screen creation software (GT Designer2, GT Designer or DU/WIN).
1) GOT-F900 Series
When the main menu screen change operation is disabled.
a)While pressing and holding the upper left corner of the screen,
turn on the power. Keep holding the upper left corner for about
25 seconds more.
Then, press "END" at the upper right corner.
b)Press "PLC TYPE".
c) Set the following.
PLC TYPE:OMRON C SERIES
CONNECTION:LINK PORT (RS-422)
DST STATION # (STATION #) : 00 to 31
GOT STATION # (−)
When the main menu screen change operation is enabled.
a)Press the upper left corner of the screen. (The position to be
pressed can be changed in the GOT and the screen creation
software.)
b)Press "OTHER MODE" on the menu.
c) Press "SET-UP MODE" on the menu.
d)Press "PLC TYPE".
e)Set the following.
PLC TYPE: OMRON C SERIES
CONNECTION:LINK PORT (RS-422)
DST STATION # (STATION #) : 00 to 31
GOT STATION # (−)
- When the screen data is transferred to the GOT-F900, the old data including the PLC type, connection type,
and station number are overwritten.
Connection of SYSMAC C Series PLC (Manufactured by Omron) 15
Operation
LINK PORT (RS-232C)
: −
Operation
LINK PORT (RS-232C)
: −
Display (screen name)
The "LANGUAGE" screen appears.
The "SET-UP MODE" screen appears.
The "PLC TYPE" screen appears.
Display (screen name)
The "SELECT MODE" screen appears.
The "OTHER MODE" screen appears.
The "SET-UP MODE" screen appears.
The "PLC TYPE" screen appears.
15-18