Changeover Of Connection Between Plc And Personal Computer - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
6.3.3

Changeover of Connection between PLC and Personal Computer

For connecting a personal computer, the status of the PLC port of the F943 Handy GOT should be
changed over from PLC connection to personal computer connection (screen data transfer) by the
screen operation. The operations of the Handy GOT are explained below.
1) Startup operation
<When the OS version is 6.00 or later>
When the SELECT MODE screen change operation is disabled.
a)While pressing and holding the upper left corner of the screen,
turn on the power. Keep holding the upper left corner for about
25 seconds more.
Then, press "END" at the upper right corner.
b)Press "END" at the upper right corner.
c) Press "OTHER MODE" on the menu.
d)Press "DATA TRANSFER" on the menu.
When the main SELECT MODE change operation is enabled.
a)Press the upper left corner of the screen. (The position to be
pressed can be changed in the GOT and the screen creation
software.)
b)Press "OTHER MODE" on the menu.
c) Press "DATA TRANSFER" on the menu.
2) Screen operation
When the "DATA TRANSFER" screen shown below appears, set "PORT" to "EXTERNAL PORT" by
touching the screen.
EXTERNL PORT
PORT
INTERNAL PORT Specifies the personal computer port (RS-232C) provided on the rear face.
When changing over the screen to a user screen after having transferred the screen data,
"INTERNAL PORT" is automatically specified and communication with the PLC is enabled.
3) Caution on use
Though "PORT" is displayed also in the F940 Handy GOT, it is invalid because only RS-422
connection is available.
Operation
Operation
DATA TRANSFER
PORT
GOT ↔ PC
WATING
Specifies the PLC connector.
Connection of Peripheral Equipment 6
Display (screen name)
The "LANGUAGE" screen appears.
The "SET-UP MODE" screen appears.
The "SELECT MODE" screen appears.
The "OTHER MODE" screen appears.
The "DATA TRANSFER" screen appears.
Display (screen name)
The "SELECT MODE" screen appears.
The "OTHER MODE" screen appears.
The "DATA TRANSFER" screen appears.
END
EXTERNL PORT
6-8