GOT-F900 SERIES (CONNECTION)
4) DU/WIN
[Setting method] a)Open DU/WIN.
b)Read the file of the screen data for which bar code reader
[Control device] c)Set the control devices.
[Bar code setting] d)Set the head device and the number of devices (default value: 2)
Operation
connection is to be set.
On the menu, select "View/Project"-"System Settings"-"Interface
Devices".
Set "Word Device" and "Bit Device" inside the device range of the
connected equipment.
After setting, click the [OK] button.
For the word device range specifications, refer to section 3.3.
to which the data read by the bar code reader is transferred (GOT-
F900 → connected equipment).
On the menu, select "View/Projects"-"System Settings"-"Bar Code
Settings".
Check "Device points", and set "Device" and "Device points".
After setting, click the [OK] button.
For the word device range specifications, refer to chapter 3.3.
Connection of Bar Code Reader 22
Display (screen name)
The "Interface Devices"
dialog box appears.
The "Bar Code Settings"
dialog box appears.
22-11
21
22
23