Mitsubishi Electric F920GOT-K Hardware Manual page 488

GOT-F900 SERIES (CONNECTION)
[Change method] Change the connection type of the already created data as follows.
Connection of FP Series PLC (Manufactured by Matsushita Electric Works) 18
Operation
Click "Got Setup" in the tree of the system environment menu.
e)Set the following.
Port : RS-232C
Type : CPU
Station No. : 00 to 31 ("00" is treated as "01".)
GOT Station No. : −
In the case of F943 Handy GOT
Without regard to the port setting (RS-422 or RS-232C), the
COM0 side of the RS-232C is fixed for PLC connection.
a)Open GT Designer2.
b)Click the [Project]-[Open] button.
c)Open (read) the screen data to be changed.
d)On the menu, select "Common"-"System Environment".
- For the contents of setting, refer to c) of [Creation] above.
- For selection of the RS-232C on the FP Series PLCs, refer to e)
of [Creation] above.
Display (screen name)
The "Select Project"
dialog box appears.
The "System
Environment" dialog box
appears.
18-10